QIDAMT
Product Overview
Aluminum Plate 1060 is a commercially pure aluminum alloy with a minimum aluminum content of 99.6%. It offers outstanding electrical and thermal conductivity, excellent corrosion resistance, high ductility, and good weldability, making it one of the most widely used pure aluminum grades in the industry. Our 1060 aluminum plates are produced through hot rolling and cold rolling processes, available in various tempers including O, H14, H24, H18 and H112, with custom sizes and surface finishes to meet your exact requirements.
Chemical Composition (%), GB/T 3190 & ASTM B209
Al (Aluminum): 99.60 min
Si (Silicon): 0.25 max
Fe (Iron): 0.35 max
Cu (Copper): 0.05 max
Mn (Manganese): 0.03 max
Mg (Magnesium): 0.03 max
Zn (Zinc): 0.05 max
Ti (Titanium): 0.03 max
V (Vanadium): 0.05 max
Others Each: 0.03 max, Others Total: 0.10 max
Mechanical Properties (Typical Values)
Temper O (Annealed): Tensile Strength 70-100 MPa, Yield Strength 25-50 MPa, Elongation 35-50%
Temper H14 (Half Hard): Tensile Strength 95-130 MPa, Yield Strength 70-110 MPa, Elongation 5-15%
Temper H24 (Half Hard, Stabilized): Tensile Strength 95-125 MPa, Yield Strength 75-115 MPa, Elongation 6-14%
Temper H18 (Full Hard): Tensile Strength 120-150 MPa, Yield Strength 100-135 MPa, Elongation 1-5%
Hardness: 35-55 HB (depending on temper)
Modulus of Elasticity: 69 GPa (10,000 ksi)
Shear Strength: 62 MPa (O temper)
Physical Properties
Density: 2.71 g/cm³ (0.0975 lb/in³)
Melting Point: 645-655°C (1193-1211°F)
Thermal Conductivity: 234 W/(m·K) at 25°C – one of the highest among aluminum alloys
Electrical Conductivity: 62% IACS (International Annealed Copper Standard)
Electrical Resistivity: 2.8 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.6 × 10⁻⁶/K (20-100°C)
Specific Heat Capacity: 900 J/(kg·K)
Specifications
Standards: GB/T 3880, GB/T 3190, ASTM B209, EN 485, JIS H4000, DIN EN 573
Thickness: 0.3 mm – 200 mm (0.012″ – 8″)
Width: 500 mm – 2600 mm (custom slitting available)
Length: 500 mm – 12000 mm (custom cutting available)
Temper: O, H12, H14, H16, H18, H22, H24, H32, H112
Surface Finish: Mill finish, Bright, Embossed, Coated (PVDF/PE), Anodized (natural color), Mirror
Tolerance: Thickness: ±0.05mm (thin) to ±0.3mm (thick), Width/Length: ±1mm
Edge: Sheared edge, sawn edge, or as per requirement
Key Features & Advantages
- Ultra-high purity – 99.6% minimum aluminum content
- Excellent electrical conductivity – ideal for electrical and electronic applications
- Outstanding thermal conductivity – perfect for heat exchangers and radiators
- Superior corrosion resistance – forms a natural protective oxide film
- Excellent formability – suitable for deep drawing, spinning, bending, and stamping
- Good weldability – easy to weld with conventional methods
- High ductility – excellent for cold forming operations
- Lightweight – only one-third the weight of steel
- Non-magnetic and non-sparking – safe for specialized environments
- Fully recyclable – environmentally friendly material
Applications
- Electrical industry – bus bars, conductors, capacitor foils, transformer windings
- Heat transfer equipment – radiators, condensers, heat exchangers, evaporators
- Electronics – heat sinks, casings, chassis, LED components
- Chemical equipment – storage tanks, piping, reaction vessels
- Decoration and architecture – curtain wall panels, ceiling panels, signage
- Food and pharmaceutical industry – containers, packaging, equipment
- Instrumentation – precision instruments, measuring equipment
- Automotive – heat shields, trim, body panels
- General manufacturing – nameplates, tags, stamping parts
- Lighting – reflectors, lamp housings
Quality Control & Testing
Every batch of our 1060 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of aluminum content and impurity levels
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Physical Testing: Conductivity measurement, thickness measurement (micrometer/ultrasonic gauge)
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / ASTM B209
Documentation: Mill Test Certificate (MTC), material traceability, conformity certificate
Packaging & Shipping
Packaging: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection
Marking: Alloy, temper, size, heat number, standard, manufacturer logo
Trade Terms: FOB, CIF, CFR, EXW, DDP
Payment: T/T (30% deposit, 70% before shipment), L/C at sight, Western Union, PayPal (sample orders)
Lead Time: Standard sizes in stock – 3-7 days; Custom sizes – 15-25 days
MOQ: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
Why Choose Us
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 1060 aluminum plates to customers in more than 50 countries. Our factory is equipped with advanced rolling, cutting, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
