Tel: +86-13969518618     E-mail: sales@qidamt.com

About   Contact    |

Product Name 5086 Aluminum
Alloy 5086 aluminum are alloyed with magnesium and derive most of their strength from work-hardening.
Temper H12,H14,H16,H18,H19 etc.
Thickness 0.1mm to 10mm
Width For coil: 600mm ~ 2000mm, or as customize
For sheet: 20mm ~ 2200mm, or as customize
Weight/Coil As the customer’s request
MOQ 3 ton
Delivery time Aound 30 days
Payment terms T/T  L/C
Container 20ft: 5898mm(L)*2352mm(W)*2393mm(H)  Loading 18-25 tons         40ft:12032mm(L)*2352mm(W)*2393mm(H)  Loading  25-27 tons
Packing 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips

Chemical Composition

 

Chemical Composition %
Si Fe Cu Mn Mg Zr Cr Zn Ti Residuals
5086 ≤0.40 ≤0.50 ≤0.10 0.2-0.7 3.5-4.5 / 0.05-0.25 ≤0.25 ≤0.15 ≤0.15


Mechanical Properties

Mechanical Properties
Property Value
Tensile Strength 270 to 390 MPa
Yield Strength 110 to 320 MPa
Elongation 1.7 to 20%
Shear Strength 220 to 250 MPa

Tempers

  • 5086-F Aluminum
  • 5086-H111 Aluminum
  • 5086-H112 Aluminum
  • 5086-H116 Aluminum
  • 5086-H12 Aluminum
  • 5086-H14 Aluminum
  • 5086- H16 Aluminum
  • 5086-H18 Aluminum
  • 5086- H22 Aluminum
  • 5086-H24 Aluminum
  • 5086-H26 Aluminum
  • 5086-H28 Aluminum
  • 5086-H32 Aluminum
  • 5086-H321 Aluminum
  • 5086-H32 Aluminum
  • 5086-H34 Aluminum
  • 5086-H36 Aluminum
  • 5086-H38 Aluminum
  • 5086-O Alumium

Fabrication and Heat Treatment

 

Annealing

Aluminum 5086 alloy can be annealed at 343 ℃ and cooled in air.

 

Cold working

Aluminum 5086 alloy has excellent cold working charateristics in the O temper and less good H38 and H36 temper.

 

Welding

Conventional methods are suitable for welding Aluminum 5086 alloy. Excellent results can be obtained when electric arc welding is used for this alloy.

 

Forging

Aluminum 5086 alloy can be forged.

Application

  • Missile components
  • Welded pressure vessels
  • Auto aircraft cryogenics
  • TV towers
  • Drilling rigs
  • Transportation equipment
  • Marine parts应用.jpg

Process Flow

工艺流程.jpg

FAQ

1. Q:Are you a manufacturer or trading company?

A: We are a manufacturer, can do OEM and ODM.

 

2. Q: Can i get some samples? What product information do i need to provide?

A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.

 

3. Q: How does your factory do regarding quality control?

A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2          technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.

 

4. Q:What is your payment?

A: Generally we accept 30% T/T as deposit and 70% against with B/L copy

Packing & Shipping

 

包装 图.jpg

包装 图片.jpg

 

    PersonalBusinessDistributor

    Prev:

    Next:

    Leave a Reply

    Leave a message