PROGRÈS
Product Overview
Plaque en aluminium 5052 is an aluminum-magnesium (Al-Mg) alloy from the 5000 série, widely recognized as one of the strongest non-heat-treatable aluminum alloys. It offers excellent corrosion resistance, especially in marine and saltwater environments, high fatigue strength, good weldability, and superior formability. Notre 5052 aluminum plates are available in flat sheets, diamond tread (à carreaux) plates, and custom cut sizes, in O, H32, H34, H36, H38, H112 and H114 tempers, making them the first choice for marine, transport, and structural applications.
Composition chimique (%), GB/T 3190 & ASTM B209
Al (Aluminium): 95.7 – 97.7 (balance)
Mg (Magnésium): 2.2 – 2.8 (principal alloying element)
Cr (Chrome): 0.15 – 0.35
Et (Silicium): 0.25 max
Fe (Fer): 0.40 max
Cu (Cuivre): 0.10 max
Mn (Manganèse): 0.10 max
Zn (Zinc): 0.10 max
Others Each: 0.05 max, Others Total: 0.15 max
Propriétés mécaniques (Typical Values)
Temper O (Recuit): Résistance à la traction 170-215 MPa, Limite d'élasticité 65-110 MPa, Élongation 20-30%
Temper H32 (Strain Hardened 1/4): Résistance à la traction 215-265 MPa, Limite d'élasticité 160-215 MPa, Élongation 8-14%
Temper H34 (Strain Hardened 1/2): Résistance à la traction 235-285 MPa, Limite d'élasticité 180-240 MPa, Élongation 6-12%
Temper H36 (Strain Hardened 3/4): Résistance à la traction 255-305 MPa, Limite d'élasticité 200-260 MPa, Élongation 5-10%
Temper H38 (Full Hard): Résistance à la traction 270-320 MPa, Limite d'élasticité 220-280 MPa, Élongation 3-8%
Dureté: 47-75 HB (depending on temper)
Résistance à la fatigue: 110-130 MPa (at 5×10⁸ cycles, H32-H38)
Résistance au cisaillement: 125-150 MPa
Propriétés physiques
Densité: 2.68 g/cm³ (0.097 lb/in³)
Melting Point: 607-649°C (1125-1200°F)
Conductivité thermique: 138 W/(m·K) at 25°C
Conductivité électrique: 35% IACS (annealed)
Electrical Resistivity: 4.93 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.8 × 10⁻⁶/K (20-100°C)
Module d'élasticité: 70 GPa (10,200 ksi)
Modulus of Rigidity: 26 GPa
Specifications
Normes: GB/T 3880, GB/T 3190, ASTM B209, DANS 485, JIS H4000, VOTRE UN 573
Épaisseur: 0.3 mm – 200 mm (0.012″ – 8″)
Largeur: 500 mm – 2600 mm (custom slitting available)
Longueur: 500 mm – 12000 mm (custom cutting available)
Caractère: Ô, H32, H34, H36, H38, H112, H114
Finition de surface: Mill finish, Bright, Diamond tread (5-bar/2-bar), Stucco embossed, Coated (PVDF/PE)
Tolérance: Épaisseur: ±0.05mm (thin) to ±0.3mm (thick), Width/Length: ±1mm
Bord: Sheared edge, sawn edge, or as per requirement
Key Features & Avantages
- Excellent marine corrosion resistance – ideal for saltwater and coastal environments
- One of the strongest non-heat-treatable aluminum alloys
- High fatigue strength – superior performance under repeated loading
- Excellent weldability – suitable for MIG, Tig, and spot welding
- Good formability and workability – easy to bend, roll, stamp, and machine
- Non-heat-treatable but strain-hardenable – consistent properties after forming
- Lightweight with high strength-to-weight ratio
- Excellent impact resistance and toughness at low temperatures
- Non-toxic and food-safe – suitable for food processing equipment
- Available in diamond tread pattern for anti-slip applications
Applications
- Marine industry – boat hulls, ponts, bulkheads, marine fittings, docks
- Shipbuilding – superstructures, réservoirs, hatch covers, gangways
- Transportation – truck bodies, bandes annonces, fuel tanks, tool boxes
- Anti-slip flooring – walkways, escaliers, platforms, rampes, vehicle decks
- Pressure vessels – LPG tanks, air receivers, hydraulic tanks
- Heat exchangers and condensers – evaporators, refroidisseurs
- Électronique – battery casings, chassis, housings
- Architecture – curtain walls, bardage, toiture, stair treads
- Équipement chimique – storage tanks, piping, reaction vessels
- Food and beverage – equipment, réservoirs, conveyors, work surfaces
- Machinery – guards, housings, covers, bases
Quality Control & Testing
Every batch of our 5052 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of magnesium and chromium content
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Formability Testing: Cupping test (Erichsen), bend test per temper
Corrosion Testing: Salt spray test (ASTM B117) – essential for marine-grade certification
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / ASTM B209
Documentation: Mill Test Certificate (MTC), material traceability, conformity certificate
Emballage & Expédition
Emballage: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection
Marking: Alliage, caractère, taille, heat number, standard, manufacturer logo
Trade Terms: GOUSSET, CIF, CFR, EXW, DDP
Paiement: T/T (30% deposit, 70% before shipment), L/C at sight, Western Union, PayPal (sample orders)
Délai de mise en œuvre: Standard sizes in stock – 3-7 jours; Custom sizes – 15-25 jours
MOQ: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
Pourquoi nous choisir
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 5052 aluminum plates to customers in more than 50 des pays, including shipyards and marine equipment manufacturers. Our factory is equipped with advanced rolling, cutting, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes, tempers, and tread patterns for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
