PROGRÈS
Product Overview
Plaque en aluminium 3003 is an aluminum-manganese (Al-Mn) alloy belonging to the 3000 série, commonly known as “anti-rust aluminum” (防锈铝). Manganese is the principal alloying element, which increases the strength of the alloy by approximately 20% over pure aluminum 1060 while maintaining excellent formability, weldability, and superior corrosion resistance. Notre 3003 aluminum plates are widely used in tanks, cookware, échangeurs de chaleur, and general sheet metal work, available in O, H14, H16, H24, H18 and H112 tempers with custom sizes.
Composition chimique (%), GB/T 3190 & ASTM B209
Al (Aluminium): 96.75 – 99.0 (balance)
Mn (Manganèse): 1.0 – 1.5 (principal alloying element)
Et (Silicium): 0.6 max
Fe (Fer): 0.7 max
Cu (Cuivre): 0.05 – 0.20
Zn (Zinc): 0.10 max
De (Titane): 0.05 max
Others Each: 0.05 max, Others Total: 0.15 max
Propriétés mécaniques (Typical Values)
Temper O (Recuit): Résistance à la traction 95-130 MPa, Limite d'élasticité 35-70 MPa, Élongation 25-35%
Temper H14 (Half Hard): Résistance à la traction 140-180 MPa, Limite d'élasticité 115-165 MPa, Élongation 8-15%
Temper H24 (Half Hard, Stabilized): Résistance à la traction 145-185 MPa, Limite d'élasticité 115-165 MPa, Élongation 6-12%
Temper H18 (Full Hard): Résistance à la traction 185-220 MPa, Limite d'élasticité 165-205 MPa, Élongation 2-6%
Dureté: 40-60 HB (depending on temper)
Module d'élasticité: 69 GPa (10,000 ksi)
Résistance au cisaillement: 76-110 MPa
Résistance à la fatigue: 55 MPa (at 5×10⁸ cycles)
Propriétés physiques
Densité: 2.73 g/cm³ (0.0986 lb/in³)
Melting Point: 643-654°C (1190-1210°F)
Conductivité thermique: 190 W/(m·K) at 25°C (O temper)
Conductivité électrique: 50% IACS
Electrical Resistivity: 3.45 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.2 × 10⁻⁶/K (20-100°C)
Module d'élasticité: 69 GPa (10,000 ksi)
Specifications
Normes: GB/T 3880, GB/T 3190, ASTM B209, DANS 485, JIS H4000, VOTRE UN 573
Épaisseur: 0.3 mm – 200 mm (0.012″ – 8″)
Largeur: 500 mm – 2600 mm (custom slitting available)
Longueur: 500 mm – 12000 mm (custom cutting available)
Coil Weight: 500 kg – 15 MT
Caractère: Ô, H12, H14, H16, H18, H22, H24, H32, H112
Finition de surface: Mill finish, Bright, Embossed (diamond/tread), Stucco, Coated (PVDF/PE)
Tolérance: Épaisseur: ±0.05mm (thin) to ±0.3mm (thick), Width/Length: ±1mm
Bord: Sheared edge, sawn edge, or as per requirement
Key Features & Avantages
- Excellent corrosion resistance – performs well in atmospheric, Marin, and chemical environments
- ~20% stronger than pure aluminum 1060 while retaining good formability
- Superior weldability – suitable for MIG, Tig, and resistance welding
- Excellent workability – good for deep drawing, spinning, estampillage, and bending
- Good thermal conductivity – ideal for heat exchange applications
- Non-toxic and food-safe – approved for food contact applications
- Poids léger – one-third the weight of steel
- Good fatigue resistance – suitable for repeated loading applications
- Excellent paint adhesion – ideal base for coated and decorative products
- Fully recyclable – environmentally friendly
Applications
- Tanks and storage vessels – water tanks, fuel tanks, chemical containers
- Cookware and food equipment – pots, pans, baking trays, food containers
- Heat exchangers and condensers – automotive radiators, air conditioning units
- Marine applications – boat hulls, marine fittings, dock structures
- Architecture – toiture, bardage, gouttières, downspouts
- Automotive – heat shields, fuel tanks, trim panels
- Équipement chimique – piping, vessels, storage containers
- General sheet metal – cabinets, enclosures, supports
- Pressure vessels – LPG tanks, air receivers (in certain tempers)
- Decorative products – plaques signalétiques, signs, luminaires
Quality Control & Testing
Every batch of our 3003 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of manganese content and impurity levels
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Formability Testing: Cupping test (Erichsen), bend test per temper
Corrosion Testing: Salt spray test (ASTM B117) for corrosion resistance verification
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / ASTM B209
Documentation: Mill Test Certificate (MTC), material traceability, conformity certificate
Emballage & Expédition
Emballage: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection; coils wrapped with moisture-proof film and edge protectors
Marking: Alliage, caractère, taille, heat number, standard, manufacturer logo
Trade Terms: GOUSSET, CIF, CFR, EXW, DDP
Paiement: T/T (30% deposit, 70% before shipment), L/C at sight, Western Union, PayPal (sample orders)
Délai de mise en œuvre: Standard sizes in stock – 3-7 jours; Custom sizes – 15-25 jours
MOQ: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
Pourquoi nous choisir
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 3003 aluminum plates to customers in more than 50 des pays. Our factory is equipped with advanced rolling, cutting, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
