5052-H32 Aluminum Floor Plate – Diamond Tread Plate

QIDAMT · ALUMINUM FLOOR PLATE

Corrosion-resistant 5052-H32 aluminum tread plate with diamond pattern for flooring, ramps and platforms.

5052-H32 aluminum floor plate is a marine-grade Al-Mg alloy in the H32 temper with a raised diamond (five-bar) pattern. It delivers excellent corrosion resistance in wet and salt environments plus reliable slip resistance, making it the preferred tread plate for boats, trucks, platforms and cleanrooms.

Key Advantages

Slip Resistant

Raised diamond pattern grips in wet areas.

Superb Corrosion Resistance

Ideal for marine and coastal service.

Light Weight

~2.68 g/cm³, easy to handle and install.

Weldable

Good weldability for frames and ramps.

ترکیب شیمیایی (AA 5052)

عنصر	Mg	Cr	و	Fe	Cu	منگنز	Zn	Al
محتوا %	2.20 – 2.80	0.15 – 0.35	≤ 0.25	≤ 0.40	≤ 0.10	≤ 0.10	≤ 0.10	Balance

Mechanical Properties (H32)

Tensile strength (σb): 210 – 260 MPa
Yield strength (σ0.2): 130 – 180 MPa
Elongation (δ): ≥ 12 %
Hardness: ~HB 60

Standard Sizes

Parameter	Range
ضخامت	1.5 – 8.0 میلی متر
عرض	1000 – 2500 میلی متر
طول	2000 – 6000 میلی متر (cut to size)
الگو	Diamond / five-bar tread
استاندارد	ASTM B209 / AA 5052 / EN AW-5052 / GB/T 3880

برنامه های کاربردی

5052-H32 aluminum floor plate is used for boat decks and dock ramps, truck and trailer floors, stair treads and catwalks, factory platforms, vehicle steps, cleanroom walls and floors, tool boxes, and architectural accents. For strip see our 1050 aluminum strip, and for angle profiles 6061-T6 angle.