6061-T6 Aluminum Angle – Extruded Equal Angle Bar

QIDAMT · ALUMINUM ANGLE

Heat-treatable 6061-T6 extruded aluminum angle for structural framing, brackets and machine guards.

6061-T6 aluminum angle is an extruded Al-Mg-Si structural section supplied in the T6 temper. It provides high strength-to-weight ratio, clean sharp edges and consistent dimensions, making it the default choice for frames, supports, brackets and trim where a rigid L-section is needed.

Key Advantages

High Strength

T6 temper gives ~310 MPa tensile strength.

Sharp True Angles

Extruded 90° corners stay square for joining.

Weldable

Good TIG/MIG welding for frame assemblies.

Corrosion Resistant

Natural oxide layer protects in service.

ترکیب شیمیایی (AA 6061)

عنصر	و	Fe	Cu	منگنز	Mg	Cr	Zn	Ti	Al
محتوا %	0.40 – 0.80	≤ 0.70	0.15 – 0.40	≤ 0.15	0.80 – 1.20	0.04 – 0.35	≤ 0.25	≤ 0.15	Balance

Mechanical Properties (T6)

Tensile strength (σb): ≥ 310 MPa
Yield strength (σ0.2): ≥ 275 MPa
Elongation (δ): ≥ 12 %
Hardness: ≥ HB 95

Standard Sizes

Parameter	Range
Equal leg (A×A)	10×10 – 200×200 mm
Unequal leg (A×B)	20×10 – 150×100 mm
Wall thickness	1.0 – 20.0 میلی متر
طول	3 – 6 m (cut to length)
استاندارد	ASTM B221 / AA 6061 / EN AW-6061 / GB/T 6892

برنامه های کاربردی

6061-T6 aluminum angle is used for structural frames and racks, brackets and supports, machine guards, door and window frames, ladder rails, solar mounting frames, truck bodies, conveyor frames and architectural trims. For channel profiles see our 6061-T6 aluminum channel, and for flat bar 6061-T6 flat bar.