进步
产品概述
铝管 6063 is an aluminum-magnesium-silicon (Al-Mg-Si) alloy tube renowned for its excellent extrudability, outstanding surface finish quality, and superior anodizing response. It is the first choice for architectural, 装饰性的, and consumer applications where appearance and formability matter most. 我们的 6063 aluminum tubes are available in T4, T5 and T6 tempers, produced per ASTM B221, 在 755, 国标/T 5237 and JIS H4100 standards, with custom outer diameters, wall thicknesses, lengths, and anodized or powder-coated finishes.
化学成分 (%), ASTM B221 / 国标/T 3190
铝 (铝): 97.5 – 99.35 (balance)
镁 (镁): 0.45 – 0.9
和 (硅): 0.20 – 0.6
铁 (铁): 0.35 最大限度
铜 (铜): 0.10 最大限度
锰 (锰): 0.10 最大限度
锌 (锌): 0.10 最大限度
铬 (铬): 0.10 最大限度
的 (钛): 0.10 最大限度
其他各: 0.05 最大限度, 其他总计: 0.15 最大限度
机械性能 (典型值, Tube)
Temper T4 (Solution Heat Treated & Naturally Aged): 抗拉强度 130-180 兆帕, 屈服强度 70-120 兆帕, 伸长 14-18%
Temper T5 (Cooled & Artificially Aged): 抗拉强度 160-205 兆帕, 屈服强度 110-175 兆帕, 伸长 8-12%
Temper T6 (Solution Treated & Artificially Aged): 抗拉强度 205-245 兆帕, 屈服强度 170-215 兆帕, 伸长 8-12%
硬度: 73 HB (T6)
剪切强度: 140 兆帕 (T6)
疲劳强度: 70 兆帕 (T6, at 5×10⁸ cycles)
物理特性
密度: 2.70 g/cm³ (0.0975 磅/立方英寸)
熔点: 615-655℃ (1140-1210°F)
导热系数: 201 带/(m·K) 25°C 时 (T5)
电导率: 50% 国际化学学会 (T5)
电阻率: 3.4 × 10⁻⁸ Ω·m
热膨胀系数: 23.4 × 10⁻⁶/K (20-100℃)
弹性模量: 68.3 GPa (9,900 克西)
Poisson Ratio: 0.33
规格
标准: ASTM B221 (extruded), 在 755-2 / 755-5, 国标/T 5237 (建筑学), 就H4100, 国际标准化组织 6362
Outer Diameter: 10 毫米 – 400 毫米 (0.4″ – 15.7″)
室壁厚度: 0.8 毫米 – 30 毫米 (0.03″ – 1.18″)
长度: 1 米 – 12 米 (可定制切割)
脾气: T4, T5, T6
类型: Extruded round, square, rectangular, oval, and custom profile tubes
表面处理: 铣削加工, 明亮的, 阳极氧化 (silver, black, champagne, bronze, gold), Powder coated (any RAL color), Wood grain transfer, Brushed, 抛光
宽容: 从: ±0.3mm to ±1.0mm, Wall: ±8-10%, 长度: ±5mm
Special: Anodizing thickness 8-25 microns per GB/T 5237.2; 粉末涂料 60-120 微米
主要特点 & 优点
- Excellent extrudability – complex cross-sections and thin walls achievable
- Superior surface finish quality – smooth, uniform, and defect-free surfaces
- Outstanding anodizing response – consistent, 明亮的, and durable anodic films
- Good corrosion resistance – ideal for exterior architectural applications
- Medium strength with adequate structural performance for building applications
- 优异的成型性 – easy to bend, 切, and fabricate
- 轻的 – reduces building dead load and installation cost
- Excellent weldability – suitable for frames and assemblies
- Wide range of decorative finishes – 阳极氧化, 粉末涂层, wood grain
- Recyclable and sustainable – 100% recyclable with low carbon footprint
应用领域
- Architectural – window and door frames, curtain wall mullions, handrails, railings
- 建造 – scaffolding, awnings, canopies, gates, fencing, staircases
- 家具 – table and chair frames, shelving, display stands, wardrobe rails
- 灯光 – LED profile housings, light fixtures, channel tracks
- Solar energy – photovoltaic mounting frames, support structures, 括号
- 汽车 – 修剪, roof racks, seat frames, luggage racks
- 电子产品 – 散热器, equipment enclosures, chassis frames
- Machinery guards – safety guards, 外壳, covers
- Sports and fitness – exercise equipment frames, goal posts, hurdles
- Decoration – ceiling grids, partition frames, picture frames, showcases
质量控制 & 测试
我们的每一批 6063 aluminum tubes undergoes strict quality control:
化学分析: Spectrometer verification of Mg and Si content
机械测试: 拉伸试验, 屈服强度测试, 伸长率测试, 硬度测试 (每脾气)
Surface Quality Inspection: Visual and dye-penetrant inspection for die lines, 划痕, blisters, and stains
Anodizing Quality Test: Anodic film thickness, seal quality, and color consistency tests (per GB/T 5237.2)
Dimensional Inspection: 从, wall thickness, straightness, twist, and length checks
文档: 工厂测试证书 (MTC), 物料追溯, 合格证书
包装 & 船运
包装: 标准出口包装 – tubes bundled with plastic caps on both ends, protective paper interleaving between tubes, 用防水牛皮纸和塑料薄膜包裹, 木托盘或板条箱, 钢带捆扎; surface protection film for anodized and coated tubes
标记: 合金, 脾气, 尺寸, 热数, 标准, 制造商标志
贸易条款: 离岸价格, 到岸价格, 病死率, 出厂前, 顺铂
支付: 电汇 (30% 订金, 70% 发货前), 即期信用证, 西联汇款, 贝宝 (样品订单)
交货时间: 标准尺寸有库存 – 3-7 天; Custom sizes and finishes – 15-30 天
起订量: 300 标准尺寸公斤; 定制订单可协商
装货港: 青岛, 上海, 天津, 宁波, 或按要求
为什么选择我们
随着超过 15 多年铝制造和出口经验, 我们是值得信赖的供应商 6063 aluminum tubes to curtain wall contractors, furniture manufacturers, and LED lighting companies in more than 50 国家. Our factory is equipped with modern extrusion lines, 阳极氧化线, and powder coating lines, providing one-stop solutions from raw tube to finished surface treatment. We maintain large inventory of standard sizes, 脾气, and finishes for immediate delivery, 我们经验丰富的团队可以为您的具体应用提供技术咨询和定制解决方案. 立即联系我们获取有竞争力的报价!
