C11000 Copper Coil – ETP Pure Copper Coil & Strip

QIDAMT · COPPER COIL

C11000 Copper Coil – ETP Pure Copper Strip & Coil

Electrolytic tough pitch (ETP) copper coil with 101% IACS conductivity for electrical, thermal and stamping applications.

C11000 copper coil is produced from electrolytic tough pitch copper with a minimum copper content of 99.90%. It combines the highest practical electrical conductivity with excellent formability, making it the default material for busbars, transformer windings, cable shielding, radiators and precision stamped parts.

Key Advantages

101% IACS Conductivity

Highest practical conductivity for electrical parts.

Excellent Formability

Deep drawing, bending and stamping friendly.

High Ductility

Soft temper allows elongation above 35%.

Weldable & Brazable

Good response to soldering and brazing.

Chemical Composition (C11000 / ETP)

Element	Cu	O	Ag	Pb	Fe
Innehåll %	≥ 99.90	0.02 – 0.04	≤ 0.025	≤ 0.005	≤ 0.005

Mechanical & Physical Properties (Annealed O)

Tensile strength (σb): 220 – 250 MPa
Yield strength (σ0.2): 70 – 85 MPa
Elongation (δ): ≥ 35 %
Electrical conductivity: ≥ 101 % IACS
Density: 8.89 g/cm³

Standard Sizes

Parameter	Range
Thickness	0.05 – 3.0 mm
Width	5 – 650 mm (slit to order)
Coil ID	300 / 400 / 500 mm
Coil OD	≤ 1300 mm
Temper	O / H01 / H02 / H04
Standard	ASTM B152 / GB/T 2059 / JIS H3100

Ansökningar

C11000 copper coil is widely used in transformer windings, busbars and electrical connectors, cable shields and braided straps, radiator and heat-exchanger fins, grounding strips, motor commutator segments, RF shielding and decorative trim. For copper tube and plate from the same family see our C12200 copper tube and C11000 copper plate.

Processing & Förpackning

Slitting, shearing, flattening and surface cleaning available. Coils are wrapped with moisture-proof paper and strapped on export pallets or in wooden crates.