ПРОГРЕСС
Обзор продукта
Алюминиевый круглый стержень 6061 is a precipitation-hardened aluminum-magnesium-silicon (Аль-Мг-Си) alloy rod, one of the most versatile and widely machined aluminum products in the industry. It combines medium-to-high strength, excellent machinability, good weldability, and superior corrosion resistance. Наш 6061 aluminum round bars are available in T4, T6, T651 and T6511 tempers, produced per ASTM B211, ГБ/Т 3191, В 755 and JIS H4040 standards, with diameters from 3 мм до 500 mm and custom lengths.
Химический состав (%), АСТМ Б211 / ГБ/Т 3190
Ал (Алюминий): 95.8 – 98.6 (balance)
мг (Магний): 0.8 – 1.2
И (Кремний): 0.4 – 0.8
Cu (Медь): 0.15 – 0.40
Кр (Chromium): 0.04 – 0.35
Фе (Железо): 0.70 max
Зн (Цинк): 0.25 max
Мин. (Марганец): 0.15 max
Из (Titanium): 0.15 max
Others Each: 0.05 max, Others Total: 0.15 max
Механические свойства (Typical Values, Bar)
Temper T4 (Solution Heat Treated & Naturally Aged): Предел прочности 180-240 МПа, Предел текучести 110-170 МПа, Удлинение 14-18%
Temper T6 (Solution Treated & Artificially Aged): Предел прочности 290-310 МПа, Предел текучести 240-290 МПа, Удлинение 8-12%
Temper T651 (T6 + Stress Relieved): Предел прочности 290-310 МПа, Предел текучести 240-290 МПа, Удлинение 8-12%
Temper T6511 (T6 + Stress Relieved, Extruded): Предел прочности 290-310 МПа, Предел текучести 240-290 МПа, Удлинение 8-12%
Твердость: 95 полупансион (T6)
Прочность на сдвиг: 205 МПа (T6)
Усталость сила: 96 МПа (T6, at 5×10⁸ cycles)
Физические свойства
Плотность: 2.70 г/см³ (0.0975 lb/in³)
Melting Point: 582-652° C. (1080-1205° F.)
Теплопроводность: 167 W/(m·K) at 25°C (T6)
Электрическая проводимость: 43% МАКО (T6)
Electrical Resistivity: 4.0 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.6 × 10⁻⁶/K (20-100° C.)
Модуль упругости: 68.9 ГПа (10,000 кси)
Poisson Ratio: 0.33
Технические характеристики
Стандарты: АСТМ Б211 (rolled/drawn), АСТМ Б221 (extruded), ГБ/Т 3191, В 755-2 / 755-3, JIS H4040, QQ-A-225/8
Диаметр: 3 мм – 500 мм (0.12″ – 19.7″)
Длина: 1 м – 12 м (custom cutting available)
Характер: О, Т4, T6, T651, T6511
Тип: Extruded bar, rolled bar, drawn bar, precision ground bar
Поверхностная обработка: Отделка мельницы, Яркий, Drawn, Precision ground (h7-h9), Anodized
Толерантность: Диаметр: ±0.1mm (drawn) to ±1.0mm (extruded), Straightness: ≤1mm/m
Special: Precision ground bars with h7/h8/h9 tolerance for machining centers
Ключевые особенности & Преимущества
- Excellent machinability – ideal for CNC turning, фрезерование, и бурение
- Medium-to-high strength – reliable for structural and load-bearing parts
- Good corrosion resistance – suitable for indoor and outdoor applications
- Excellent weldability – fully weldable with 4043 или 5356 filler
- Heat treatable – T6 temper provides maximum mechanical properties
- Good dimensional stability – stress-relieved tempers available
- Consistent roundness and straightness – tight tolerances
- Легкий вес – reduces component weight in machinery and transport
- Good anodizing response – attractive protective finishes
- Available in precision ground condition – ready for high-precision parts
Приложения
- Machinery – shafts, spindles, ролики, штифт, шестерни, valve stems
- Автомобильная промышленность – drive shafts, suspension parts, крепежные детали, spacers
- Fasteners – bolts, винты, studs, заклепки, орехи
- Строительство – structural members, кронштейны, anchors, арматура
- Аэрокосмическая промышленность – non-critical structural parts, кронштейны, арматура
- Морской – propeller shafts, арматура, hardware
- Электроника – heat sink rods, antenna elements, support rods
- Tooling – mold components, приспособления, приспособления, mandrels
- Sports equipment – archery components, climbing gear, poles
- General engineering – bushings, standoffs, дюбели, custom machined parts
Quality Control & Testing
Every batch of our 6061 aluminum round bars undergoes strict quality control:
Chemical Analysis: Spectrometer verification of Mg, И, Cu, Cr content
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Heat Treatment Verification: Hardness and conductivity testing to verify T6 treatment
Dimensional Inspection: Диаметр, roundness, straightness, and length checks
Surface Inspection: Visual inspection for scratches, pits, laps, and die marks
Ultrasonic Testing: UT inspection for internal soundness (available on request)
Documentation: Mill Test Certificate (МТС), material traceability, conformity certificate
Упаковка & Перевозки
Упаковка: Standard export packaging – bars bundled with steel straps or polypropylene straps, protective paper or film wrapping, wooden pallets or crates for heavy bundles; individual protective tubes for precision ground bars
Marking: Сплав, характер, размер, heat number, стандартный, manufacturer logo
Trade Terms: FOB, CIF, CFR, EXW, DDP
Payment: T/T (30% deposit, 70% перед отправкой), L/C at sight, Western Union, PayPal (sample orders)
Время выполнения: Standard sizes in stock – 3-7 дни; Custom sizes – 15-30 дни
минимальный заказ: 300 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
почему выбрали нас
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 6061 aluminum round bars to machinery manufacturers, fastener producers, and automotive companies in more than 50 countries. Our factory is equipped with modern extrusion, drawing, heat treatment, and precision grinding lines, ensuring consistent quality and tight dimensional accuracy. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!