ПРОГРЕСС
Product Overview
Алюминиевая пластина 6061 is an aluminum-magnesium-silicon (Al-Mg-Si) alloy from the 6000 ряд, one of the most versatile and widely used heat-treatable aluminum alloys. It can be strengthened through heat treatment to achieve excellent mechanical properties, combining medium-to-high strength with good formability, weldability, механизм, и коррозионная стойкость. Наш 6061 aluminum plates are available in T4, T6, T651 and O tempers, in flat and diamond tread patterns, with custom sizes and surface finishes. It is the preferred choice for structural, mechanical, and architectural applications worldwide.
Химический состав (%), ГБ/Т 3190 & АСТМ Б209
Al (Алюминий): 95.85 – 98.6 (balance)
мг (Magnesium): 0.8 – 1.2
И (Кремний): 0.40 – 0.8
Cu (Медь): 0.15 – 0.40
Кр (Chromium): 0.04 – 0.35
Фе (Железо): 0.7 max
Зн (Zinc): 0.25 max
Мин. (Марганец): 0.15 max
Из (Titanium): 0.15 max
Others Each: 0.05 max, Others Total: 0.15 max
Механические свойства (Typical Values)
Temper O (Отожженный): Предел прочности 125-175 МПа, Предел текучести 55-110 МПа, Удлинение 25-30%
Temper T4 (Solution Heat Treated): Предел прочности 205-285 МПа, Предел текучести 110-170 МПа, Удлинение 16-22%
Temper T6 (Solution Heat Treated & Artificially Aged): Предел прочности 290-330 МПа, Предел текучести 240-290 МПа, Удлинение 10-12%
Temper T651 (T6 + Stress Relieved): Предел прочности 290-330 МПа, Предел текучести 240-290 МПа, Удлинение 10-12%
Твердость: 60 HB (О), 95 HB (T6)
Усталость сила: 96 МПа (T6, at 5×10⁸ cycles)
Прочность на сдвиг: 205 МПа (T6)
Brinell Hardness: 95 HB (T6, 500 kg load)
Физические свойства
Плотность: 2.70 g/cm³ (0.098 lb/in³)
Melting Point: 582-652° C. (1080-1205° F.)
Теплопроводность: 167 W/(m·K) at 25°C (T6)
Электрическая проводимость: 43% IACS (T6)
Electrical Resistivity: 3.99 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.6 × 10⁻⁶/K (20-100° C.)
Модуль упругости: 68.9 ГПа (10,000 кси)
Modulus of Rigidity: 26 ГПа
Poisson Ratio: 0.33
Specifications
Standards: ГБ/Т 3880, ГБ/Т 3190, АСТМ Б209, В 485, JIS H4000, ВАШ ОДИН 573
Толщина: 0.3 мм – 250 мм (0.012″ – 10″)
Ширина: 500 мм – 2600 мм (custom slitting available)
Длина: 500 мм – 12000 мм (custom cutting available)
Характер: О, Т4, T6, T651, T6511
Surface Finish: Отделка мельницы, Bright, Diamond tread (клетчатый), Anodized, Coated (PVDF/PE)
Толерантность: Толщина: ±0.05mm (thin) to ±0.5mm (thick), Width/Length: ±1mm, Flatness: per ASTM B209
Edge: Sheared edge, sawn edge, or as per requirement
Key Features & Преимущества
- Heat-treatable – strength can be significantly enhanced through T6/T651 treatment
- Excellent strength-to-weight ratio – medium-to-high strength at one-third the weight of steel
- Good corrosion resistance – suitable for atmospheric, industrial, and marine environments
- Excellent weldability – fully weldable by MIG, Тиг, and resistance methods
- Superior machinability – excellent for CNC machining and precision parts
- Good formability in O/T4 tempers – formable before heat treatment to T6
- Excellent anodizing response – ideal for decorative and protective anodized finishes
- Consistent mechanical properties – solution heat treated and artificially aged
- Good fatigue resistance and toughness
- Универсальный – the most commonly specified aluminum alloy for structural applications
Приложения
- Structural components – мосты, trusses, рамки, support structures
- Aerospace and aviation – aircraft structures, арматура, interior components
- Transportation – truck frames, trailers, rail cars, marine structures
- Machinery and equipment – рамки, bases, guards, housings
- Mold and tooling – plastic injection molds, приспособления, приспособления, plates
- Электроника – chassis, enclosures, heat sinks, mounting plates
- Architecture – curtain wall mullions, handrails, canopies, structural glazing
- Oil and gas – piping supports, platforms, offshore structures
- Sports equipment – bicycle frames, ski poles, ladder rails
- Defense and security – vehicle armor, equipment housings
- General fabrication – weldments, assemblies, precision parts
Quality Control & Testing
Every batch of our 6061 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of Mg, И, Cu, Cr content
Heat Treatment Verification: Conductivity testing, hardness testing to verify T4/T6 treatment effectiveness
Mechanical Testing: Tensile test, yield strength test, elongation test per temper
Formability Testing: Bend test per temper
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / АСТМ Б209
Documentation: Mill Test Certificate (MTC), material traceability, heat treatment records, conformity certificate
Упаковка & Перевозки
Упаковка: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection
Marking: Сплав, характер, размер, heat number, стандартный, manufacturer logo
Trade Terms: FOB, CIF, CFR, EXW, DDP
Payment: T/T (30% deposit, 70% перед отправкой), L/C at sight, Western Union, PayPal (sample orders)
Время выполнения: Standard sizes in stock – 3-7 дни; Custom sizes – 15-25 дни
минимальный заказ: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
почему выбрали нас
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 6061 aluminum plates to customers in more than 50 countries. Our factory is equipped with advanced rolling, heat treatment, cutting, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
