PROGRESUL
Product Overview
Placa de aluminiu 3003 is an aluminum-manganese (Al-Mn) alloy belonging to the 3000 series, commonly known as “anti-rust aluminum” (防锈铝). Manganese is the principal alloying element, which increases the strength of the alloy by approximately 20% over pure aluminum 1060 while maintaining excellent formability, weldability, and superior corrosion resistance. Our 3003 aluminum plates are widely used in tanks, cookware, heat exchangers, and general sheet metal work, available in O, H14, H16, H24, H18 and H112 tempers with custom sizes.
Compoziție chimică (%), GB/T 3190 & ASTM B209
Al (Aluminiu): 96.75 – 99.0 (balance)
Mn (Manganese): 1.0 – 1.5 (principal alloying element)
Si (Silicon): 0.6 max
Fe (Iron): 0.7 max
Cu (Cupru): 0.05 – 0.20
Zn (Zinc): 0.10 max
De (Titanium): 0.05 max
Others Each: 0.05 max, Others Total: 0.15 max
Mechanical Properties (Typical Values)
Temper O (Annealed): Tensile Strength 95-130 MPa, Yield Strength 35-70 MPa, Elongation 25-35%
Temper H14 (Half Hard): Tensile Strength 140-180 MPa, Yield Strength 115-165 MPa, Elongation 8-15%
Temper H24 (Half Hard, Stabilized): Tensile Strength 145-185 MPa, Yield Strength 115-165 MPa, Elongation 6-12%
Temper H18 (Full Hard): Tensile Strength 185-220 MPa, Yield Strength 165-205 MPa, Elongation 2-6%
Hardness: 40-60 HB (depending on temper)
Modulus of Elasticity: 69 GPa (10,000 ksi)
Shear Strength: 76-110 MPa
Fatigue Strength: 55 MPa (at 5×10⁸ cycles)
Physical Properties
Density: 2.73 g/cm³ (0.0986 lb/in³)
Melting Point: 643-654°C (1190-1210°F)
Thermal Conductivity: 190 W/(m·K) at 25°C (O temper)
Electrical Conductivity: 50% IACS
Electrical Resistivity: 3.45 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.2 × 10⁻⁶/K (20-100°C)
Modulus of Elasticity: 69 GPa (10,000 ksi)
Specifications
Standards: GB/T 3880, GB/T 3190, ASTM B209, ÎN 485, JIS H4000, DIN EN 573
Grosime: 0.3 mm – 200 mm (0.012″ – 8″)
Lăţime: 500 mm – 2600 mm (custom slitting available)
Lungime: 500 mm – 12000 mm (custom cutting available)
Coil Weight: 500 kg – 15 MT
Temper: O, H12, H14, H16, H18, H22, H24, H32, H112
Surface Finish: Mill finish, Bright, Embossed (diamond/tread), Stucco, Coated (PVDF/PE)
Toleranţă: Grosime: ±0.05mm (thin) to ±0.3mm (thick), Width/Length: ±1mm
Margine: Sheared edge, sawn edge, or as per requirement
Key Features & Avantaje
- Excellent corrosion resistance – performs well in atmospheric, marine, and chemical environments
- ~20% stronger than pure aluminum 1060 while retaining good formability
- Superior weldability – suitable for MIG, TIG, and resistance welding
- Excellent workability – good for deep drawing, spinning, Ștampilare, and bending
- Good thermal conductivity – ideal for heat exchange applications
- Non-toxic and food-safe – approved for food contact applications
- Lightweight – one-third the weight of steel
- Good fatigue resistance – suitable for repeated loading applications
- Excellent paint adhesion – ideal base for coated and decorative products
- Fully recyclable – environmentally friendly
Applications
- Tanks and storage vessels – water tanks, fuel tanks, chemical containers
- Cookware and food equipment – pots, pans, baking trays, food containers
- Heat exchangers and condensers – automotive radiators, air conditioning units
- Marine applications – boat hulls, marine fittings, dock structures
- Architecture – roofing, cladding, gutters, downspouts
- Automotive – heat shields, fuel tanks, trim panels
- Chemical equipment – piping, vessels, storage containers
- General sheet metal – cabinets, enclosures, brackets
- Pressure vessels – LPG tanks, air receivers (in certain tempers)
- Decorative products – nameplates, signs, lighting fixtures
Quality Control & Testing
Every batch of our 3003 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of manganese content and impurity levels
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Formability Testing: Cupping test (Erichsen), bend test per temper
Corrosion Testing: Salt spray test (ASTM B117) for corrosion resistance verification
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / ASTM B209
Documentation: Mill Test Certificate (MTC), material traceability, conformity certificate
Ambalare & Transport
Ambalare: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection; coils wrapped with moisture-proof film and edge protectors
Marking: Alloy, temper, dimensiune, heat number, standard, manufacturer logo
Trade Terms: Fob, CIF, CFR, EXW, DDP
Plată: T/T (30% deposit, 70% before shipment), L/C at sight, Western Union, PayPal (sample orders)
Perioada de graţie: Standard sizes in stock – 3-7 zile; Custom sizes – 15-25 zile
MOQ: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
De ce să ne alegeți
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 3003 aluminum plates to customers in more than 50 țări. Our factory is equipped with advanced rolling, cutting, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
