PROGRESSO
Product Overview
Placa de alumínio 6061 is an aluminum-magnesium-silicon (Al-Mg-Si) alloy from the 6000 Series, one of the most versatile and widely used heat-treatable aluminum alloys. It can be strengthened through heat treatment to achieve excellent mechanical properties, combining medium-to-high strength with good formability, weldability, maquinabilidade, and corrosion resistance. Nosso 6061 aluminum plates are available in T4, T6, T651 and O tempers, in flat and diamond tread patterns, with custom sizes and surface finishes. It is the preferred choice for structural, mechanical, and architectural applications worldwide.
Composição química (%), GB/T 3190 & ASTM B209
Al (Alumínio): 95.85 – 98.6 (balance)
mg (Magnesium): 0.8 – 1.2
E (Silício): 0.40 – 0.8
Cu (Cobre): 0.15 – 0.40
Cr (Chromium): 0.04 – 0.35
Fé (Ferro): 0.7 max
Zn (Zinc): 0.25 max
Mn (Manganês): 0.15 max
De (Titanium): 0.15 max
Others Each: 0.05 max, Others Total: 0.15 max
Propriedades mecânicas (Typical Values)
Temper O (Recozido): Resistência à tracção 125-175 MPa, Força de rendimento 55-110 MPa, Alongamento 25-30%
Temper T4 (Solution Heat Treated): Resistência à tracção 205-285 MPa, Força de rendimento 110-170 MPa, Alongamento 16-22%
Temper T6 (Solution Heat Treated & Artificially Aged): Resistência à tracção 290-330 MPa, Força de rendimento 240-290 MPa, Alongamento 10-12%
Temper T651 (T6 + Stress Relieved): Resistência à tracção 290-330 MPa, Força de rendimento 240-290 MPa, Alongamento 10-12%
Dureza: 60 HB (Ó), 95 HB (T6)
Força de fadiga: 96 MPa (T6, at 5×10⁸ cycles)
Força de cisalhamento: 205 MPa (T6)
Brinell Hardness: 95 HB (T6, 500 kg load)
Propriedades físicas
Densidade: 2.70 g/cm³ (0.098 lb/in³)
Melting Point: 582-652°C (1080-1205°F)
Condutividade térmica: 167 W/(m·K) at 25°C (T6)
Condutividade elétrica: 43% IACS (T6)
Electrical Resistivity: 3.99 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.6 × 10⁻⁶/K (20-100°C)
Módulos de elasticidade: 68.9 GPa (10,000 ksi)
Modulus of Rigidity: 26 GPa
Poisson Ratio: 0.33
Specifications
Padrões: GB/T 3880, GB/T 3190, ASTM B209, EM 485, JIS H4000, SEU UM 573
Grossura: 0.3 milímetros – 250 milímetros (0.012″ – 10″)
Largura: 500 milímetros – 2600 milímetros (custom slitting available)
Comprimento: 500 milímetros – 12000 milímetros (custom cutting available)
Temperamento: Ó, T4, T6, T651, T6511
Acabamento de superfície: Acabamento do moinho, Bright, Diamond tread (xadrez), Anodized, Coated (PVDF/PE)
Tolerância: Grossura: ±0.05mm (thin) to ±0.5mm (thick), Width/Length: ±1mm, Flatness: per ASTM B209
Borda: Sheared edge, sawn edge, or as per requirement
Key Features & Vantagens
- Heat-treatable – strength can be significantly enhanced through T6/T651 treatment
- Excellent strength-to-weight ratio – medium-to-high strength at one-third the weight of steel
- Good corrosion resistance – suitable for atmospheric, industrial, e ambientes marinhos
- Excellent weldability – fully weldable by MIG, TIG, and resistance methods
- Superior machinability – excellent for CNC machining and precision parts
- Good formability in O/T4 tempers – formable before heat treatment to T6
- Excellent anodizing response – ideal for decorative and protective anodized finishes
- Consistent mechanical properties – solution heat treated and artificially aged
- Good fatigue resistance and toughness
- Versátil – the most commonly specified aluminum alloy for structural applications
Formulários
- Structural components – pontes, trusses, quadros, support structures
- Aerospace and aviation – aircraft structures, acessórios, interior components
- Transportation – truck frames, trailers, rail cars, marine structures
- Machinery and equipment – quadros, bases, guards, housings
- Mold and tooling – plastic injection molds, gabaritos, jogos, plates
- Eletrônicos – chassis, enclosures, heat sinks, mounting plates
- Architecture – curtain wall mullions, handrails, canopies, structural glazing
- Oil and gas – piping supports, platforms, offshore structures
- Sports equipment – bicycle frames, ski poles, ladder rails
- Defense and security – vehicle armor, equipment housings
- General fabrication – weldments, assemblies, precision parts
Quality Control & Testing
Every batch of our 6061 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of Mg, E, Cu, Cr content
Heat Treatment Verification: Conductivity testing, hardness testing to verify T4/T6 treatment effectiveness
Mechanical Testing: Tensile test, yield strength test, elongation test per temper
Formability Testing: Bend test per temper
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / ASTM B209
Documentação: Mill Test Certificate (MTC), material traceability, heat treatment records, conformity certificate
Embalagem & Envio
Embalagem: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection
Marking: Liga, temperamento, tamanho, heat number, standard, manufacturer logo
Trade Terms: FOB, CIF, CFR, EXW, DDP
Pagamento: T/T (30% deposit, 70% antes do envio), L/C at sight, Western Union, PayPal (sample orders)
Tempo de espera: Standard sizes in stock – 3-7 dias; Custom sizes – 15-25 dias
Quantidade mínima: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
Porque escolher-nos
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 6061 aluminum plates to customers in more than 50 países. Our factory is equipped with advanced rolling, heat treatment, cutting, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
