ຄວາມຄືບໜ້າ
6061-T6 vs 6063-T5 Aluminum Extrusion: Which Alloy to Choose?
Aluminum Sheet Gauge Chart: ຄວາມຫນາ, Weight and Use Cases
Aluminum sheet is sold by gauge in some markets and by millimeters in others. The conversion is not linear, and the same gauge number means different thickness for aluminum versus steel. This guide gives you the common gauge-to-mm chart, the weight per square meter, and the typical use for each thickness.
Common Thickness Chart
| Gauge | ຄວາມຫນາ (ມມ) | ນ້ຳໜັກ 6061 (kg/m²) | ການນໍາໃຊ້ປົກກະຕິ |
|---|---|---|---|
| 30 ga | 0.25 | 0.68 | ຟອຍ, flashing |
| 20 ga | 0.81 | 2.19 | ແຜງ, gutters |
| 16 ga | 1.51 | 4.08 | ມຸງ, siding |
| 1/8″ | 3.18 | 8.59 | General sheet |
| 1/4″ | 6.35 | 17.1 | Machining plate |
| 1/2″ | 12.7 | 34.3 | Tooling plate |
| 1″ | 25.4 | 68.6 | Thick tooling |
Gauge vs Millimeter: Why It Matters
Aluminum gauge follows the Aluminum Association standard, which differs from steel gauge. A 16-gauge aluminum sheet is 1.51 ມມ, while 16-gauge steel is 1.59 mm — close, but not identical. When quoting, always specify millimeters rather than gauge, because gauge numbers vary by standard (US Sheet, Brown & Sharpe, and others). If a supplier quotes “14 gauge aluminum,” ask for the actual mm before ordering, because the tolerance can be ±0.05 mm. ເບິ່ງຂອງພວກເຮົາ 1060 ແຜ່ນອາລູມິນຽມ ແລະ 5052 ແຜ່ນ.
Weight Estimation
ນ້ຳໜັກ (kg/m²) = thickness (ມມ) × density (g/cm³). ສໍາລັບ 6061 (2.70 g/cm³), a 3 mm sheet weighs 8.1 kg/m². ສໍາລັບ 5052 (2.68), it is 8.04 kg/m². ສໍາລັບ 1060 ອະລູມິນຽມບໍລິສຸດ (2.71), it is 8.13 kg/m². The differences are small, but for large orders over tonnes, they add up. Always confirm whether the price is per net weight or per piece, and whether the mill certificate measures actual thickness or nominal.
