진전
Product Overview
알루미늄 튜브 5052 is a non-heat-treatable aluminum-magnesium (Al-Mg) alloy tube with excellent corrosion resistance, particularly in saltwater and marine environments, combined with medium strength, good weldability, and outstanding formability. It is the preferred choice for marine hardware, hydraulic and pneumatic systems, fuel lines, and pressure applications where corrosion resistance and reliability are critical. 우리의 5052 aluminum tubes are available as seamless tubes in O, H32, H34 and H112 tempers, produced per ASTM B210, GB/T 4437, 안에 755 and JIS H4080 standards, with large-diameter options up to 600 mm.
화학적 구성 요소 (%), ASTM B210 / GB/T 3190
알 (알류미늄): 95.7 – 97.7 (balance)
마그네슘 (마그네슘): 2.2 – 2.8 (principal alloying element)
Cr (크롬): 0.15 – 0.35
그리고 (규소): 0.25 max
철 (철): 0.40 max
구리 (구리): 0.10 max
망 (망간): 0.10 max
아연 (아연): 0.10 max
Others Each: 0.05 max, Others Total: 0.15 max
기계적 성질 (Typical Values, Tube)
Temper O (Annealed): 인장강도 170-215 MPa, 항복 강도 65-130 MPa, 연장 15-25%
Temper H32 (Strain Hardened & Stabilized): 인장강도 215-265 MPa, 항복 강도 160-215 MPa, 연장 8-14%
Temper H34 (Strain Hardened & Stabilized): 인장강도 235-285 MPa, 항복 강도 180-240 MPa, 연장 6-12%
Temper H112 (As Fabricated): 인장강도 195-245 MPa, 항복 강도 90-160 MPa, 연장 8-14%
경도: 60 HB (H34)
전단강도: 150 MPa (H34)
피로 강도: 110 MPa (H34, at 5×10⁸ cycles)
물리적 특성
밀도: 2.68 g/cm3 (0.0968 lb/in³)
Melting Point: 607-649°C (1125-1200°F)
열 전도성: 138 W/(m·K) at 25°C
전기 전도도: 35% IACS
Electrical Resistivity: 4.9 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.8 × 10⁻⁶/K (20-100°C)
탄성 계수: 70.3 평점 (10,200 ksi)
Poisson Ratio: 0.33
Specifications
표준: ASTM B210 (seamless), GB/T 4437.1, 안에 755-2 / 755-5, JIS H4080, 에서 1746
Outer Diameter: 6 mm – 600 mm (0.24″ – 23.6″, large-diameter specialty)
벽 두께: 0.5 mm – 50 mm (0.02″ – 1.97″)
길이: 1 m – 12 m (custom cutting available)
성질: 영형, H32, H34, H112
유형: Seamless tube, drawn tube, large-diameter tube
Surface Finish: Mill finish, Bright, Pickled
Tolerance: 의: ±0.1mm (drawn) to ±1.5mm (large diameter), Wall: ±8-10%, 길이: ±5mm
Special: Hydrostatic pressure tested tubes available for pressure applications
Key Features & Advantages
- Excellent corrosion resistance – outstanding performance in seawater and marine environments
- Medium strength with good fatigue resistance – reliable under cyclic loading
- Excellent weldability – retains corrosion resistance in weld zones
- Outstanding formability – can be bent, flared, flanged, and expanded
- Good pressure resistance – suitable for hydraulic and pneumatic systems
- Non-heat-treatable – stable properties without aging concerns
- 경량 – one-third the weight of steel tubing
- Stress corrosion cracking resistant – excellent for marine service
- Available in large diameters up to 600 mm
- Consistent dimensional accuracy with tight tolerances
Applications
- Marine – boat railings, masts, rigging, fuel lines, water intake systems
- Hydraulic and pneumatic systems – pressure lines, cylinders, actuators
- Fuel systems – fuel lines, filler necks, vent lines in vehicles and vessels
- Pressure vessels – air receivers, accumulators, storage cylinders
- Chemical and petrochemical – piping, heat exchanger tubes, processing lines
- Desalination plants – evaporator tubes, condenser tubes, piping
- Automotive – oil cooler lines, air brake lines, suspension components
- 열교환기 – condenser and evaporator tubing, cooling coils
- Irrigation – sprinkler systems, water distribution lines
- General industry – handrails, ladders, structural frames, 기계 부품
Quality Control & Testing
Every batch of our 5052 aluminum tubes undergoes strict quality control:
Chemical Analysis: Spectrometer verification of magnesium content
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Corrosion Testing: Salt spray test per ASTM B117 for marine applications
Pressure Testing: Hydrostatic testing or eddy current testing for pressure-rated tubes
Dimensional Inspection: 의, wall thickness, roundness, straightness, and length checks
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and die lines
선적 서류 비치: Mill Test Certificate (MTC), material traceability, conformity certificate
포장 & 배송
포장: Standard export packaging – tubes bundled with plastic caps on both ends, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping; large-diameter tubes individually wrapped and secured with wooden frames
Marking: 합금, 성질, size, heat number, standard, manufacturer logo
Trade Terms: 본선 인도, CIF, CFR, EXW, DDP
지불: T/T (30% deposit, 70% before shipment), L/C at sight, Western Union, PayPal (sample orders)
리드 타임: Standard sizes in stock – 3-7 날; Custom sizes – 15-30 날
MOQ: 300 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
왜 우리를 선택 했습니까
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 5052 aluminum tubes to shipyards, hydraulic equipment manufacturers, and chemical processing companies in more than 50 countries. Our factory is equipped with modern drawing, annealing, and testing lines, ensuring consistent quality and reliable performance in demanding environments. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
