진전
Product Overview
알루미늄 판 6061 is an aluminum-magnesium-silicon (Al-Mg-Si) alloy from the 6000 시리즈, one of the most versatile and widely used heat-treatable aluminum alloys. It can be strengthened through heat treatment to achieve excellent mechanical properties, combining medium-to-high strength with good formability, 용접성, 가공성, 및 내식성. 우리의 6061 aluminum plates are available in T4, T6, T651 and O tempers, in flat and diamond tread patterns, with custom sizes and surface finishes. It is the preferred choice for structural, mechanical, and architectural applications worldwide.
화학적 구성 요소 (%), GB/T 3190 & ASTM B209
알 (알류미늄): 95.85 – 98.6 (balance)
마그네슘 (마그네슘): 0.8 – 1.2
그리고 (규소): 0.40 – 0.8
구리 (구리): 0.15 – 0.40
Cr (크롬): 0.04 – 0.35
철 (철): 0.7 max
아연 (아연): 0.25 max
망 (망간): 0.15 max
의 (티탄): 0.15 max
Others Each: 0.05 max, Others Total: 0.15 max
기계적 성질 (Typical Values)
Temper O (Annealed): 인장강도 125-175 MPa, 항복 강도 55-110 MPa, 연장 25-30%
Temper T4 (Solution Heat Treated): 인장강도 205-285 MPa, 항복 강도 110-170 MPa, 연장 16-22%
Temper T6 (Solution Heat Treated & Artificially Aged): 인장강도 290-330 MPa, 항복 강도 240-290 MPa, 연장 10-12%
Temper T651 (T6 + Stress Relieved): 인장강도 290-330 MPa, 항복 강도 240-290 MPa, 연장 10-12%
경도: 60 HB (영형), 95 HB (T6)
피로 강도: 96 MPa (T6, at 5×10⁸ cycles)
전단강도: 205 MPa (T6)
브리넬 경도: 95 HB (T6, 500 kg load)
물리적 특성
밀도: 2.70 g/cm3 (0.098 lb/in³)
Melting Point: 582-652°C (1080-1205°F)
열 전도성: 167 W/(m·K) at 25°C (T6)
전기 전도도: 43% IACS (T6)
Electrical Resistivity: 3.99 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.6 × 10⁻⁶/K (20-100°C)
탄성 계수: 68.9 평점 (10,000 ksi)
Modulus of Rigidity: 26 평점
Poisson Ratio: 0.33
Specifications
표준: GB/T 3880, GB/T 3190, ASTM B209, 안에 485, HE H4000, 당신의 것 573
두께: 0.3 mm – 250 mm (0.012″ – 10″)
너비: 500 mm – 2600 mm (custom slitting available)
길이: 500 mm – 12000 mm (custom cutting available)
성질: 영형, T4, T6, T651, T6511
Surface Finish: Mill finish, Bright, Diamond tread (체크무늬), Anodized, Coated (PVDF/PE)
Tolerance: 두께: ±0.05mm (thin) to ±0.5mm (thick), Width/Length: ±1mm, Flatness: per ASTM B209
가장자리: Sheared edge, sawn edge, or as per requirement
Key Features & Advantages
- Heat-treatable – strength can be significantly enhanced through T6/T651 treatment
- Excellent strength-to-weight ratio – medium-to-high strength at one-third the weight of steel
- Good corrosion resistance – suitable for atmospheric, industrial, 해양 환경
- Excellent weldability – fully weldable by MIG, 싸움, and resistance methods
- Superior machinability – excellent for CNC machining and precision parts
- Good formability in O/T4 tempers – formable before heat treatment to T6
- Excellent anodizing response – ideal for decorative and protective anodized finishes
- Consistent mechanical properties – solution heat treated and artificially aged
- Good fatigue resistance and toughness
- Versatile – the most commonly specified aluminum alloy for structural applications
Applications
- Structural components – bridges, trusses, 프레임, support structures
- Aerospace and aviation – aircraft structures, fittings, interior components
- Transportation – truck frames, 예고편, rail cars, marine structures
- Machinery and equipment – 프레임, bases, guards, housings
- Mold and tooling – plastic injection molds, jigs, fixtures, plates
- 전자제품 – chassis, 인클로저, heat sinks, mounting plates
- Architecture – curtain wall mullions, handrails, canopies, structural glazing
- Oil and gas – piping supports, platforms, offshore structures
- 스포츠 장비 – 자전거 프레임, ski poles, ladder rails
- Defense and security – vehicle armor, equipment housings
- General fabrication – weldments, assemblies, precision parts
Quality Control & Testing
Every batch of our 6061 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of Mg, 그리고, 구리, Cr content
Heat Treatment Verification: Conductivity testing, hardness testing to verify T4/T6 treatment effectiveness
Mechanical Testing: Tensile test, yield strength test, elongation test per temper
Formability Testing: Bend test per temper
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / ASTM B209
선적 서류 비치: Mill Test Certificate (MTC), material traceability, heat treatment records, conformity certificate
포장 & 배송
포장: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection
Marking: 합금, 성질, size, heat number, standard, manufacturer logo
Trade Terms: 본선 인도, CIF, CFR, EXW, DDP
지불: T/T (30% deposit, 70% before shipment), L/C at sight, Western Union, PayPal (sample orders)
리드 타임: Standard sizes in stock – 3-7 날; Custom sizes – 15-25 날
MOQ: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
왜 우리를 선택 했습니까
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 6061 aluminum plates to customers in more than 50 countries. Our factory is equipped with advanced rolling, heat treatment, cutting, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
