상품명 | 1060 알루미늄 판 |
합금 | 6005 알루미늄은 마그네슘과 실리콘과 합금되어 있습니다., 기계로 가공하기 쉽고 석출 경화될 수 있지만 강도는 높지 않습니다. 2000 그리고 7000 시리즈는 도달할 수 있습니다. |
성질 | H112,H113,H12 etc. |
두께 | 0.2mm ~ 12mm |
너비 | 코일용: 600mm ~ 2000mm, 또는 사용자 정의 |
시트용: 20mm ~ 2200mm, 또는 사용자 정의 | |
무게/코일 | 고객의 요청에 따라 |
MOQ | 3 톤 |
배달 시간 | 아운드 30 날 |
지불 조건 | 티/티 엘/씨 |
컨테이너 | 20피트: 5898mm(엘)*2352mm(여)*2393mm(시간) 로드 중 18-25 톤 40피트:12032mm(엘)*2352mm(여)*2393mm(시간) 로드 중 25-27 톤 |
포장 | 3 포장의 층. 안에는 공예용 종이가 들어있어요, 중간은 물 플라스틱 필름이고 외부 GI 강판은 강철 스트립으로 덮여 있습니다. |
화학적 구성 요소
화학적 구성 요소 % | ||||||||||
그리고 | 철 | 구리 | 망 | 마그네슘 | Cr | V | 아연 | 의 | Al | |
1070 | ≤0.25 | ≤0.35 | ≤0.05 | ≤0.03 | ≤0.03 | / | ≤0.05 | ≤0.05 | ≤0.03 | 99.6-100 |
기계적 성질
기계적 성질 | |
재산 | 값 |
Elastic(Young’s, Tensile) Modulus | 68GPa |
Fatigue Strength | 15 에게 50 Mpa |
Elongation at Break | 1.1 에게 30% |
Shear Modulus | 26GPa |
애플리케이션:
- Manufacture of railroad tank car
- Chemical Equipment
Fabrication Response
Hardening
알류미늄 1060 alloy can be hardened only form cold working. Tempers H18, H16, H14 and H12 are determined based on the amount of cold working impacted to this alloy.
Annealing
알류미늄 1060 alloy can be annealed at 343℃ and then cooled in air.
Cold working
알류미늄 1060 has excellent cold working characteristics and conventional methods are used to readily cold work this alloy.
단조
알류미늄 1060 alloy can be forged between 510-371℃.
Variations
1.1060-H112 Aluminum
1060-H112 is 1060 aluminum in the H112 temper. This temper is actually just a variation on F (as-fabricated) that allows for the possibility of very limited strain hardening or heat treatment, under certain conditions.
It has the second lowest strength and second highest ductility compared to the other variants of 1060 aluminum.
2.1060-H113 Aluminum
1060-H113 is 1060 aluminum in the H113 temper. This temper is a very specific variation on H112 that only applies to standard tube products.
It has the lowest strength compared to the other variants of 1060 aluminum.
3.1060-H12 Aluminum
1060-H12 aluminum is 1060 aluminum in the H12 temper. To achieve this temper, this metal is strain hardened to a strength that is roughly a quarter of the way between annealed(영형) and full -hard (H18).
4.1060-H14 Aluminum
1060-H14 aluminum is 1060 aluminum in the H14 temper. To achieve this temper, this metal is strain hardened to a strength that is roughly a quarter of the way between annealed(영형) and full -hard (H18).
5.1060-H16 Aluminum
1060-H16 aluminum is 1060 aluminum in the H16 temper. To achieve this temper, this metal is strain hardened to a strength that is roughly 3/4 of the way between annealed(영형) and full -hard (H18).
6.1060-H18 Aluminum
1060-H18 aluminum is 1060 aluminum in the H18 temper. This is the strongest temper normally produced through the action of only strain hardening.
7.1060-H22 Aluminum
1060-H22 aluminum is 1060 aluminum in the H22 temper. To achieve this temper, this metal is strain hardened,and then partially annealed, to a strength that is roughly a quarter of the way between annealed(영형) and full -hard (H28).
8.1060-H24 Aluminum
1060-H24 aluminum is 1060 aluminum in the H24 temper. To achieve this temper, this metal is strain hardened,and then partially annealed, to a strength that is roughly halfway between annealed(영형) and full -hard (H28).
9.1060-H26 Aluminum
1060-H26 aluminum is 1060 aluminum in the H26 temper. To achieve this temper, this metal is strain hardened,and then partially annealed, to a strength that is roughly 3/4 of the way between annealed(영형) and full -hard (H28).
10.1060-H28 Aluminum
1060-H28 aluminum is 1060 aluminum in the H 28 temper. This is the strongest temper normally produced through the action of strain hardening followed by partial annealing. It is closely related to related H18.
11.1060-O 알루미늄
1060-O aluminum is 1060 aluminum in the annealed condition. It has the highest ductility compared to the other variants of 1060 aluminum.
프로세스 흐름
자주하는 질문
1. 큐:당신은 제조업체입니까, 아니면 무역회사입니까??
ㅏ: 우리는 제조업체입니다, OEM 및 ODM을 할 수 있습니다.
2. 큐: 샘플을 좀 얻을 수 있나요?? 어떤 제품 정보를 제공해야 하나요??
ㅏ: 예, 우리는 작은 샘플을 가지고 있습니다, A4 크기처럼. 등급을 알려주셔야 합니다 (합금 번호) 그리고 성질, 두께, 너비,길이와 수량.
3. 큐: 품질 관리와 관련하여 귀하의 공장은 어떻게 수행됩니까??
ㅏ: 품질이 최우선입니다. 우리 공장은 SGS 인증을 획득했습니다. 우리는 우리 공장에서 제품이 나올 것을 보장합니다. 100% 자격 있는. 그리고 각 과정은, 우리는 매우 엄격한 운영을 가지고 있으며 준비합니다. 2 검사하는 기술자. 제품이 완성된 후, 우리는 자격이 없는 제품을 수거하기 위해 마지막 테스트를 할 것입니다..
4. 큐:당신의 지불은 무엇입니까?
ㅏ: 일반적으로 우리는 받아들입니다 30% T/T를 보증금으로 하고 70% B/L 사본과 반대
포장 & 배송