PROGRESSO
Product Overview
Tubo in alluminio 5052 is a non-heat-treatable aluminum-magnesium (Al-Mg) alloy tube with excellent corrosion resistance, particularly in saltwater and marine environments, combined with medium strength, good weldability, and outstanding formability. It is the preferred choice for marine hardware, hydraulic and pneumatic systems, fuel lines, and pressure applications where corrosion resistance and reliability are critical. Our 5052 aluminum tubes are available as seamless tubes in O, H32, H34 and H112 tempers, produced per ASTM B210, GB/T 4437, IN 755 and JIS H4080 standards, with large-diameter options up to 600 mm.
Composizione chimica (%), ASTM B210 / GB/T 3190
Al (Alluminio): 95.7 – 97.7 (balance)
Mg (Magnesium): 2.2 – 2.8 (principal alloying element)
Cr (Chromium): 0.15 – 0.35
E (Silicon): 0.25 max
Fe (Ferro): 0.40 max
Cu (Rame): 0.10 max
Mn (Manganese): 0.10 max
Zn (Zinc): 0.10 max
Others Each: 0.05 max, Others Total: 0.15 max
Proprietà meccaniche (Typical Values, Tube)
Temper O (Annealed): Resistenza alla trazione 170-215 MPa, Forza di snervamento 65-130 MPa, Allungamento 15-25%
Temper H32 (Strain Hardened & Stabilized): Resistenza alla trazione 215-265 MPa, Forza di snervamento 160-215 MPa, Allungamento 8-14%
Temper H34 (Strain Hardened & Stabilized): Resistenza alla trazione 235-285 MPa, Forza di snervamento 180-240 MPa, Allungamento 6-12%
Temper H112 (As Fabricated): Resistenza alla trazione 195-245 MPa, Forza di snervamento 90-160 MPa, Allungamento 8-14%
Durezza: 60 HB (H34)
Resistenza al taglio: 150 MPa (H34)
Forza della fatica: 110 MPa (H34, at 5×10⁸ cycles)
Proprietà fisiche
Densità: 2.68 g/cm³ (0.0968 lb/in³)
Melting Point: 607-649° C. (1125-1200° f)
Conduttività termica: 138 W/(m·K) at 25°C
Conduttività elettrica: 35% IACS
Electrical Resistivity: 4.9 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.8 × 10⁻⁶/K (20-100° C.)
Modulo di elasticità: 70.3 GPa (10,200 ksi)
Poisson Ratio: 0.33
Specifications
Standard: ASTM B210 (seamless), GB/T 4437.1, IN 755-2 / 755-5, JIS H4080, DA 1746
Outer Diameter: 6 mm – 600 mm (0.24″ – 23.6″, large-diameter specialty)
Spessore del muro: 0.5 mm – 50 mm (0.02″ – 1.97″)
Lunghezza: 1 m – 12 m (custom cutting available)
Temperare: O, H32, H34, H112
Tipo: Seamless tube, drawn tube, large-diameter tube
Finitura superficiale: Finitura al mulino, Luminoso, Pickled
Tolerance: DI: ±0.1mm (drawn) to ±1.5mm (large diameter), Wall: ±8-10%, Lunghezza: ±5mm
Special: Hydrostatic pressure tested tubes available for pressure applications
Caratteristiche principali & Vantaggi
- Excellent corrosion resistance – outstanding performance in seawater and marine environments
- Medium strength with good fatigue resistance – reliable under cyclic loading
- Excellent weldability – retains corrosion resistance in weld zones
- Outstanding formability – can be bent, flared, flanged, and expanded
- Good pressure resistance – suitable for hydraulic and pneumatic systems
- Non-heat-treatable – stable properties without aging concerns
- Leggero – one-third the weight of steel tubing
- Stress corrosion cracking resistant – excellent for marine service
- Available in large diameters up to 600 mm
- Consistent dimensional accuracy with tight tolerances
Applicazioni
- Marino – boat railings, masts, rigging, fuel lines, water intake systems
- Hydraulic and pneumatic systems – pressure lines, cylinders, actuators
- Fuel systems – fuel lines, filler necks, vent lines in vehicles and vessels
- Pressure vessels – air receivers, accumulators, storage cylinders
- Chemical and petrochemical – piping, heat exchanger tubes, processing lines
- Desalination plants – evaporator tubes, condenser tubes, piping
- Automotive – oil cooler lines, air brake lines, suspension components
- Heat exchangers – condenser and evaporator tubing, cooling coils
- Irrigation – sprinkler systems, water distribution lines
- General industry – handrails, ladders, structural frames, parti della macchina
Quality Control & Testing
Every batch of our 5052 aluminum tubes undergoes strict quality control:
Chemical Analysis: Spectrometer verification of magnesium content
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Corrosion Testing: Salt spray test per ASTM B117 for marine applications
Pressure Testing: Hydrostatic testing or eddy current testing for pressure-rated tubes
Dimensional Inspection: DI, wall thickness, roundness, straightness, and length checks
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and die lines
Documentation: Mill Test Certificate (MTC), material traceability, conformity certificate
Confezione & Spedizione
Confezione: Standard export packaging – tubes bundled with plastic caps on both ends, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping; large-diameter tubes individually wrapped and secured with wooden frames
Marking: Lega, temperare, size, heat number, standard, manufacturer logo
Trade Terms: FOB, CIF, CFR, EXW, DDP
Payment: T/T (30% deposit, 70% prima della spedizione), L/C at sight, Western Union, PayPal (sample orders)
Tempi di consegna: Standard sizes in stock – 3-7 giorni; Custom sizes – 15-30 giorni
MOQ: 300 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
Perché scegliere noi
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 5052 aluminum tubes to shipyards, hydraulic equipment manufacturers, and chemical processing companies in more than 50 countries. Our factory is equipped with modern drawing, ricottura, and testing lines, ensuring consistent quality and reliable performance in demanding environments. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
