PROGRESSO
Product Overview
Piastra in alluminio 3003 is an aluminum-manganese (Al-Mn) alloy belonging to the 3000 serie, commonly known as “anti-rust aluminum” (防锈铝). Manganese is the principal alloying element, which increases the strength of the alloy by approximately 20% over pure aluminum 1060 while maintaining excellent formability, saldabilità, and superior corrosion resistance. Our 3003 aluminum plates are widely used in tanks, cookware, scambiatori di calore, and general sheet metal work, available in O, H14, H16, H24, H18 and H112 tempers with custom sizes.
Composizione chimica (%), GB/T 3190 & ASTM B209
Al (Alluminio): 96.75 – 99.0 (balance)
Mn (Manganese): 1.0 – 1.5 (principal alloying element)
E (Silicon): 0.6 max
Fe (Ferro): 0.7 max
Cu (Rame): 0.05 – 0.20
Zn (Zinc): 0.10 max
Di (Titanium): 0.05 max
Others Each: 0.05 max, Others Total: 0.15 max
Proprietà meccaniche (Typical Values)
Temper O (Annealed): Resistenza alla trazione 95-130 MPa, Forza di snervamento 35-70 MPa, Allungamento 25-35%
Temper H14 (Half Hard): Resistenza alla trazione 140-180 MPa, Forza di snervamento 115-165 MPa, Allungamento 8-15%
Temper H24 (Half Hard, Stabilized): Resistenza alla trazione 145-185 MPa, Forza di snervamento 115-165 MPa, Allungamento 6-12%
Temper H18 (Full Hard): Resistenza alla trazione 185-220 MPa, Forza di snervamento 165-205 MPa, Allungamento 2-6%
Durezza: 40-60 HB (depending on temper)
Modulo di elasticità: 69 GPa (10,000 ksi)
Resistenza al taglio: 76-110 MPa
Forza della fatica: 55 MPa (at 5×10⁸ cycles)
Proprietà fisiche
Densità: 2.73 g/cm³ (0.0986 lb/in³)
Melting Point: 643-654° C. (1190-1210° f)
Conduttività termica: 190 W/(m·K) at 25°C (O temper)
Conduttività elettrica: 50% IACS
Electrical Resistivity: 3.45 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.2 × 10⁻⁶/K (20-100° C.)
Modulo di elasticità: 69 GPa (10,000 ksi)
Specifications
Standard: GB/T 3880, GB/T 3190, ASTM B209, IN 485, HE H4000, IL TUO 573
Spessore: 0.3 mm – 200 mm (0.012″ – 8″)
Larghezza: 500 mm – 2600 mm (custom slitting available)
Lunghezza: 500 mm – 12000 mm (custom cutting available)
Coil Weight: 500 kg – 15 MT
Temperare: O, H12, H14, H16, H18, H22, H24, H32, H112
Finitura superficiale: Finitura al mulino, Luminoso, Embossed (diamond/tread), Stucco, Coated (PVDF/PE)
Tolerance: Spessore: ±0.05mm (thin) to ±0.3mm (thick), Width/Length: ±1mm
Edge: Sheared edge, sawn edge, or as per requirement
Caratteristiche principali & Vantaggi
- Excellent corrosion resistance – performs well in atmospheric, marine, and chemical environments
- ~20% stronger than pure aluminum 1060 while retaining good formability
- Superior weldability – suitable for MIG, TIG, and resistance welding
- Excellent workability – good for deep drawing, spinning, stampaggio, and bending
- Good thermal conductivity – ideal for heat exchange applications
- Non-toxic and food-safe – approved for food contact applications
- Leggero – one-third the weight of steel
- Good fatigue resistance – suitable for repeated loading applications
- Excellent paint adhesion – ideal base for coated and decorative products
- Fully recyclable – environmentally friendly
Applicazioni
- Tanks and storage vessels – water tanks, fuel tanks, chemical containers
- Cookware and food equipment – pots, pans, baking trays, food containers
- Heat exchangers and condensers – automotive radiators, air conditioning units
- Marine applications – boat hulls, marine fittings, dock structures
- Architecture – copertura, rivestimento, grondaie, downspouts
- Automotive – heat shields, fuel tanks, trim panels
- Chemical equipment – piping, vessels, storage containers
- General sheet metal – cabinets, enclosures, parentesi
- Pressure vessels – LPG tanks, air receivers (in certain tempers)
- Decorative products – targhette, signs, lighting fixtures
Quality Control & Testing
Every batch of our 3003 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of manganese content and impurity levels
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Formability Testing: Cupping test (Erichsen), bend test per temper
Corrosion Testing: Salt spray test (ASTM B117) for corrosion resistance verification
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per GB/T 3880 / ASTM B209
Documentation: Mill Test Certificate (MTC), material traceability, conformity certificate
Confezione & Spedizione
Confezione: Standard export packaging – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, wooden pallets or crates, steel strapping, corner protection; coils wrapped with moisture-proof film and edge protectors
Marking: Lega, temperare, size, heat number, standard, manufacturer logo
Trade Terms: FOB, CIF, CFR, EXW, DDP
Payment: T/T (30% deposit, 70% prima della spedizione), L/C at sight, Western Union, PayPal (sample orders)
Tempi di consegna: Standard sizes in stock – 3-7 giorni; Custom sizes – 15-25 giorni
MOQ: 500 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
Perché scegliere noi
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 3003 aluminum plates to customers in more than 50 countries. Our factory is equipped with advanced rolling, taglio, and surface treatment lines, ensuring consistent quality and precise dimensions. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
