304 Barra ad angolo uguale in acciaio inossidabile - Profilo a L

QIDAMT · STAINLESS STEEL ANGLE

304 Barra ad angolo uguale in acciaio inossidabile

Cold drawn hot-rolled equal L-shaped stainless angle for structural framing, support brackets and decorative trim.

304 stainless steel equal angle bar is an L-shaped austenitic stainless profile, hot rolled or cold drawn, with a 90-degree equal leg. It combines good corrosion resistance, weldability and clean appearance for both structural and decorative use.

Vantaggi principali

Aesthetic Finish

Mulino, 2B, brushed or mirror finish available.

Buona saldabilità

TIG / Saldatura MIG, no post-weld heat treatment needed.

Resistente alla corrosione

Ideal for indoor, outdoor and wet environments.

Grandi dimensioni

20×20 – 200×200 mm equal angles, plus unequal on request.

Composizione chimica (Aisi 304)

Elemento	C	E	Mn	P	S	Cr	In
Contenuto %	≤ 0.08	≤ 1.00	≤ 2.00	≤ 0.045	≤ 0.030	18.0 – 20.0	8.0 – 10.5

Proprietà meccaniche

Resistenza alla trazione (σb): ≥ 515 MPa
Forza di rendimento (σ0,2): ≥ 205 MPa
Allungamento (δ5): ≥ 40 %
Durezza: ≤ HB 187 / ≤ HRB 92

Dimensioni standard (Equal Angle)

Parametro	Allineare
Misurare (leg × leg)	20×20 – 200×200 mm
Spessore	3 – 20 mm
Lunghezza	5.8 M / 6 M (tagliato a misura)
Superficie	N.1 / 2B / spazzolato / specchio
Standard	ASTM A276 / È SUS304 / IN 1.4301

Applicazioni

304 angle bar is used in structural frames, support brackets, shelving, corrimano, curtain wall framing, kitchen equipment and decorative trim. For the full grade range see our 201/304/316 barra angolare; for channel sections see stainless channel bar.