PROGRESO
Descripción general del producto
Tubo de aluminio 6063 is an aluminum-magnesium-silicon (Al-Mg-Si) alloy tube renowned for its excellent extrudability, outstanding surface finish quality, and superior anodizing response. It is the first choice for architectural, decorativo, and consumer applications where appearance and formability matter most. Nuestro 6063 aluminum tubes are available in T4, T5 and T6 tempers, produced per ASTM B221, EN 755, GB/T 5237 and JIS H4100 standards, with custom outer diameters, wall thicknesses, lengths, and anodized or powder-coated finishes.
Composición química (%), ASTM B221 / GB/T 3190
Alabama (Aluminio): 97.5 – 99.35 (balance)
magnesio (Magnesio): 0.45 – 0.9
Y (Silicio): 0.20 – 0.6
fe (Hierro): 0.35 max
Cu (Cobre): 0.10 max
Minnesota (Manganeso): 0.10 max
zinc (Zinc): 0.10 max
cr (Cromo): 0.10 max
De (Titanium): 0.10 max
Others Each: 0.05 max, Others Total: 0.15 max
Propiedades mecánicas (Typical Values, Tube)
Temper T4 (Solution Heat Treated & Naturally Aged): Resistencia a la tracción 130-180 MPa, Fuerza de producción 70-120 MPa, Alargamiento 14-18%
Temper T5 (Cooled & Artificially Aged): Resistencia a la tracción 160-205 MPa, Fuerza de producción 110-175 MPa, Alargamiento 8-12%
Temper T6 (Solution Treated & Artificially Aged): Resistencia a la tracción 205-245 MPa, Fuerza de producción 170-215 MPa, Alargamiento 8-12%
Dureza: 73 media pensión (T6)
Resistencia a la cizalladura: 140 MPa (T6)
Resistencia a la fatiga: 70 MPa (T6, at 5×10⁸ cycles)
Propiedades físicas
Densidad: 2.70 gramos/cm³ (0.0975 lb/in³)
Melting Point: 615-655°C (1140-1210°F)
Conductividad térmica: 201 W/(m·K) at 25°C (T5)
Conductividad eléctrica: 50% SIGC (T5)
Electrical Resistivity: 3.4 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.4 × 10⁻⁶/K (20-100°C)
Módulo de elasticidad: 68.3 GPa (9,900 ksi)
Poisson Ratio: 0.33
Presupuesto
Estándares: ASTM B221 (extruded), EN 755-2 / 755-5, GB/T 5237 (arquitectónico), JIS H4100, YO ASI 6362
Outer Diameter: 10 milímetros – 400 milímetros (0.4″ – 15.7″)
Espesor de pared: 0.8 milímetros – 30 milímetros (0.03″ – 1.18″)
Longitud: 1 metro – 12 metro (custom cutting available)
Temperamento: T4, T5, T6
Tipo: Extruded round, square, rectangular, oval, and custom profile tubes
Acabado de la superficie: Acabado de la fábrica, Brillante, Anodized (plata, negro, champagne, bronze, gold), Powder coated (any RAL color), Wood grain transfer, Cepillado, Pulido
Tolerancia: DE: ±0.3mm to ±1.0mm, Muro: ±8-10%, Longitud: ±5mm
Special: Anodizing thickness 8-25 microns per GB/T 5237.2; Revestimiento de polvo 60-120 microns
Características clave & Ventajas
- Excellent extrudability – complex cross-sections and thin walls achievable
- Superior surface finish quality – smooth, uniform, and defect-free surfaces
- Outstanding anodizing response – consistent, brillante, and durable anodic films
- Good corrosion resistance – ideal for exterior architectural applications
- Medium strength with adequate structural performance for building applications
- Excellent formability – easy to bend, cortar, and fabricate
- Ligero – reduces building dead load and installation cost
- Excellent weldability – suitable for frames and assemblies
- Wide range of decorative finishes – anodizado, powder coated, wood grain
- Recyclable and sustainable – 100% recyclable with low carbon footprint
Aplicaciones
- Arquitectónico – window and door frames, curtain wall mullions, pasamanos, barandillas
- Construcción – andamio, awnings, canopies, puertas, esgrima, staircases
- Muebles – table and chair frames, shelving, display stands, wardrobe rails
- Lighting – LED profile housings, light fixtures, channel tracks
- Solar energy – photovoltaic mounting frames, support structures, soportes
- Automotor – trim, roof racks, seat frames, luggage racks
- Electrónica – heat sinks, equipment enclosures, chassis frames
- Machinery guards – safety guards, recintos, covers
- Sports and fitness – exercise equipment frames, goal posts, hurdles
- Decoration – ceiling grids, partition frames, picture frames, showcases
Control de calidad & Pruebas
Every batch of our 6063 aluminum tubes undergoes strict quality control:
Chemical Analysis: Spectrometer verification of Mg and Si content
Mechanical Testing: Tensile test, yield strength test, elongation test, prueba de dureza (per temper)
Surface Quality Inspection: Visual and dye-penetrant inspection for die lines, rayones, blisters, and stains
Anodizing Quality Test: Anodic film thickness, seal quality, and color consistency tests (per GB/T 5237.2)
Dimensional Inspection: DE, espesor de pared, straightness, twist, and length checks
Documentación: Certificado de prueba de molino (MTC), trazabilidad de materiales, certificado de conformidad
embalaje & Envío
embalaje: Embalaje estándar de exportación – tubes bundled with plastic caps on both ends, protective paper interleaving between tubes, wrapped in waterproof kraft paper and plastic film, paletas o cajas de madera, steel strapping; surface protection film for anodized and coated tubes
Calificación: Aleación, temperamento, tamaño, número de calor, estándar, logotipo del fabricante
Términos comerciales: ENGAÑAR, CIF, CFR, EXW, DDP
Pago: T/T (30% depósito, 70% antes del envío), L/C a la vista, Western Union, Paypal (pedidos de muestra)
Tiempo de entrega: Tamaños estándar en stock – 3-7 días; Custom sizes and finishes – 15-30 días
Cantidad mínima de pedido: 300 kg para tamaños estándar; pedidos personalizados negociables
Puerto de carga: Qingdao, Llevar a la fuerza, Tianjín, Ningbó, o según lo solicitado
Por qué elegirnos
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 6063 aluminum tubes to curtain wall contractors, furniture manufacturers, and LED lighting companies in more than 50 países. Our factory is equipped with modern extrusion lines, anodizing lines, and powder coating lines, providing one-stop solutions from raw tube to finished surface treatment. We maintain large inventory of standard sizes, tempers, and finishes for immediate delivery, y nuestro experimentado equipo puede proporcionar consultas técnicas y soluciones personalizadas para sus aplicaciones específicas.. Contáctenos hoy para una cotización competitiva!
