PROGRESO
Product Overview
Barra redonda de aluminio 6061 is a precipitation-hardened aluminum-magnesium-silicon (Al-Mg-Si) alloy rod, one of the most versatile and widely machined aluminum products in the industry. It combines medium-to-high strength, excellent machinability, good weldability, and superior corrosion resistance. Nuestro 6061 aluminum round bars are available in T4, T6, T651 and T6511 tempers, produced per ASTM B211, GB/T 3191, EN 755 and JIS H4040 standards, with diameters from 3 mm to 500 mm and custom lengths.
Composición química (%), ASTM B211 / GB/T 3190
Alabama (Aluminio): 95.8 – 98.6 (balance)
magnesio (Magnesium): 0.8 – 1.2
Y (Silicio): 0.4 – 0.8
Cu (Cobre): 0.15 – 0.40
cr (Chromium): 0.04 – 0.35
fe (Hierro): 0.70 max
zinc (Zinc): 0.25 max
Minnesota (Manganeso): 0.15 max
De (Titanium): 0.15 max
Others Each: 0.05 max, Others Total: 0.15 max
Propiedades mecánicas (Typical Values, Bar)
Temper T4 (Solution Heat Treated & Naturally Aged): Resistencia a la tracción 180-240 MPa, Fuerza de producción 110-170 MPa, Alargamiento 14-18%
Temper T6 (Solution Treated & Artificially Aged): Resistencia a la tracción 290-310 MPa, Fuerza de producción 240-290 MPa, Alargamiento 8-12%
Temper T651 (T6 + Stress Relieved): Resistencia a la tracción 290-310 MPa, Fuerza de producción 240-290 MPa, Alargamiento 8-12%
Temper T6511 (T6 + Stress Relieved, Extruded): Resistencia a la tracción 290-310 MPa, Fuerza de producción 240-290 MPa, Alargamiento 8-12%
Dureza: 95 media pensión (T6)
Resistencia a la cizalladura: 205 MPa (T6)
Resistencia a la fatiga: 96 MPa (T6, at 5×10⁸ cycles)
Propiedades físicas
Densidad: 2.70 gramos/cm³ (0.0975 lb/in³)
Melting Point: 582-652°C (1080-1205°F)
Conductividad térmica: 167 W/(m·K) at 25°C (T6)
Conductividad eléctrica: 43% IACS (T6)
Electrical Resistivity: 4.0 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 23.6 × 10⁻⁶/K (20-100°C)
Módulo de elasticidad: 68.9 GPa (10,000 ksi)
Poisson Ratio: 0.33
Specifications
Estándares: ASTM B211 (rolled/drawn), ASTM B221 (extruded), GB/T 3191, EN 755-2 / 755-3, JIS H4040, QQ-A-225/8
Diameter: 3 milímetros – 500 milímetros (0.12″ – 19.7″)
Longitud: 1 m – 12 m (custom cutting available)
Temperamento: oh, T4, T6, T651, T6511
Tipo: Extruded bar, rolled bar, drawn bar, precision ground bar
Acabado de la superficie: Acabado de la fábrica, Brillante, Drawn, Precision ground (h7-h9), Anodized
Tolerancia: Diameter: ±0.1mm (drawn) to ±1.0mm (extruded), Straightness: ≤1mm/m
Special: Precision ground bars with h7/h8/h9 tolerance for machining centers
Key Features & Ventajas
- Excellent machinability – ideal for CNC turning, molienda, and drilling
- Medium-to-high strength – reliable for structural and load-bearing parts
- Good corrosion resistance – suitable for indoor and outdoor applications
- Excellent weldability – fully weldable with 4043 o 5356 filler
- Heat treatable – T6 temper provides maximum mechanical properties
- Good dimensional stability – stress-relieved tempers available
- Consistent roundness and straightness – tight tolerances
- Ligero – reduces component weight in machinery and transport
- Good anodizing response – attractive protective finishes
- Available in precision ground condition – ready for high-precision parts
Aplicaciones
- Machinery – shafts, spindles, rollers, patas, engranajes, valve stems
- Automotive – drive shafts, suspension parts, fasteners, spacers
- sujetadores – bolts, tornillos, studs, remaches, nueces
- Construcción – structural members, soportes, anchors, guarniciones
- Aerospace – non-critical structural parts, soportes, guarniciones
- Marina – propeller shafts, guarniciones, hardware
- Electrónica – heat sink rods, antenna elements, support rods
- Tooling – mold components, plantillas, accesorios, mandrels
- Equipo deportivo – archery components, climbing gear, poles
- General engineering – bushings, standoffs, tacos, custom machined parts
Quality Control & Testing
Every batch of our 6061 aluminum round bars undergoes strict quality control:
Chemical Analysis: Spectrometer verification of Mg, Y, Cu, Cr content
Mechanical Testing: Tensile test, yield strength test, elongation test, hardness test (per temper)
Heat Treatment Verification: Hardness and conductivity testing to verify T6 treatment
Dimensional Inspection: Diameter, roundness, straightness, and length checks
Surface Inspection: Visual inspection for scratches, pits, laps, and die marks
Ultrasonic Testing: UT inspection for internal soundness (available on request)
Documentation: Mill Test Certificate (MTC), material traceability, conformity certificate
embalaje & Envío
embalaje: Standard export packaging – bars bundled with steel straps or polypropylene straps, protective paper or film wrapping, wooden pallets or crates for heavy bundles; individual protective tubes for precision ground bars
Marking: Aleación, temperamento, tamaño, heat number, standard, manufacturer logo
Trade Terms: ENGAÑAR, CIF, CFR, EXW, DDP
Pago: T/T (30% deposit, 70% before shipment), L/C at sight, Western Union, Paypal (sample orders)
Tiempo de entrega: Standard sizes in stock – 3-7 días; Custom sizes – 15-30 días
Cantidad mínima de pedido: 300 kg for standard sizes; custom orders negotiable
Loading Port: Qingdao, Shanghai, Tianjin, Ningbo, or as requested
Por qué elegirnos
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 6061 aluminum round bars to machinery manufacturers, fastener producers, and automotive companies in more than 50 países. Our factory is equipped with modern extrusion, drawing, heat treatment, and precision grinding lines, ensuring consistent quality and tight dimensional accuracy. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation and customized solutions for your specific applications. Contact us today for a competitive quote!
