PROGRESO
Descripción general del producto
Plato de aluminio 5083 is a high-strength aluminum-magnesium (Al-Mg) alloy from the 5000 serie, specifically developed for marine and shipbuilding applications. It delivers the highest strength among the non-heat-treatable aluminum alloys, combined with exceptional corrosion resistance in seawater, excellent weldability, and outstanding low-temperature toughness. Nuestro 5083 aluminum plates are produced per ASTM B209, GB/T 3880, EN 485 and ABS/DNV/GL/LR marine class rules, available in O, H116, H321 and H112 tempers, with custom sizes, certified for shipbuilding, plataformas marinas, pressure vessels and cryogenic applications.
Composición química (%), GB/T 3190 & ASTM B209
Alabama (Aluminio): 92.4 – 95.6 (balance)
magnesio (Magnesio): 4.0 – 4.9 (principal alloying element)
Minnesota (Manganeso): 0.40 – 1.0
cr (Cromo): 0.05 – 0.25
zinc (Zinc): 0.25 max
Y (Silicio): 0.40 max
fe (Hierro): 0.40 max
Cu (Cobre): 0.10 max
De (Titanium): 0.15 max
Others Each: 0.05 max, Others Total: 0.15 max
Propiedades mecánicas (Typical Values)
Temper O (recocido): Resistencia a la tracción 275-350 MPa, Fuerza de producción 125-200 MPa, Alargamiento 16-25%
Temper H116 (Strain Hardened, Marina): Resistencia a la tracción 290-365 MPa, Fuerza de producción 200-285 MPa, Alargamiento 12-16%
Temper H321 (Strain Hardened & Stabilized): Resistencia a la tracción 290-365 MPa, Fuerza de producción 200-285 MPa, Alargamiento 12-16%
Temper H112 (As Fabricated): Resistencia a la tracción 275-350 MPa, Fuerza de producción 125-200 MPa, Alargamiento 12-16%
Dureza: 60-75 media pensión (H116/H321)
Resistencia a la fatiga: 160 MPa (H116, at 5×10⁸ cycles)
Resistencia a la cizalladura: 170-180 MPa
Impact Toughness: Excellent down to -196°C (cryogenic applications)
Propiedades físicas
Densidad: 2.66 gramos/cm³ (0.096 lb/in³)
Melting Point: 570-640°C (1060-1185°F)
Conductividad térmica: 121 W/(m·K) at 25°C
Conductividad eléctrica: 29% SIGC (annealed)
Electrical Resistivity: 5.9 × 10⁻⁸ Ω·m
Thermal Expansion Coefficient: 24.0 × 10⁻⁶/K (20-100°C)
Módulo de elasticidad: 71 GPa (10,300 ksi)
Modulus of Rigidity: 26.4 GPa
Poisson Ratio: 0.33
Presupuesto
Estándares: ASTM B209, GB/T 3880, GB/T 3190, EN 485, JIS H4000, ABS / DNV / GL / LR / CCS marine class approvals
Espesor: 1.0 milímetros – 200 milímetros (0.04″ – 8″)
Ancho: 500 milímetros – 3200 milímetros (custom slitting available)
Longitud: 500 milímetros – 16000 milímetros (custom cutting available)
Temperamento: oh, H116, H321, H112
Acabado de la superficie: Acabado de la fábrica, Brillante, Diamond tread (a cuadros), Coated
Tolerancia: Espesor: ±0,05 mm (delgado) to ±0.5mm (thick), Width/Length: ±1mm, Flatness: per ASTM B209
Borde: Sheared edge, sawn edge, or as per requirement
Class Certification: ABS / DNV / GL / LR / CCS certificates available on request
Características clave & Ventajas
- Highest strength among non-heat-treatable aluminum alloys
- Exceptional seawater corrosion resistance – ideal for marine environments
- Outstanding weldability – retains strength in the weld zone after welding
- Excellent low-temperature toughness – suitable for cryogenic applications down to -196°C
- Marine class certified – ABS, DNV, GL, LR, CCS approvals available
- High fatigue resistance – excellent for repeated loading structures
- Good formability and machinability in all tempers
- Ligero – one-third the weight of steel, reducing vessel weight and fuel consumption
- Stress corrosion cracking resistant – excellent performance in seawater
- Long service life with minimal maintenance in marine environments
Aplicaciones
- Construcción naval – hull plates, cubiertas, bulkheads, superstructures, hatch covers
- Offshore platforms – topside structures, cubiertas, helidecks, walkways
- Marine vessels – fishing boats, yachts, workboats, patrol boats, ferries
- Pressure vessels – LNG tanks, cryogenic storage tanks, air receivers
- Rail transport – carrocerías de vagones de ferrocarril, tanques, componentes estructurales
- Road transport – carrocerías de camiones, tankers, remolques, dump bodies
- Chemical and petrochemical – storage tanks, piping, processing equipment
- Desalination plants – evaporators, condensers, piping
- Construcción – puentes, structural frames, heavy-duty platforms
- Sports and recreation – diving boards, boat trailers, stadium structures
- Cryogenic engineering – storage and transport of liquefied gases
Control de calidad & Pruebas
Every batch of our 5083 aluminum plates undergoes strict quality control:
Chemical Analysis: Spectrometer verification of magnesium and manganese content
Mechanical Testing: Tensile test, yield strength test, elongation test, prueba de dureza (per temper)
Marine Grade Testing: Intergranular corrosion test, exfoliation corrosion test, stress corrosion cracking test (per ASTM G67, G66)
Low-Temperature Testing: Charpy impact test at low temperatures for cryogenic certification
Ultrasonic Testing: UT inspection for internal soundness (available on request)
Surface Inspection: Visual inspection for scratches, pits, oxide stains, and roll marks
Flatness Check: Flatness tolerance per ASTM B209 / GB/T 3880
Documentación: Certificado de prueba de molino (MTC), marine class certificate (ABS/DNV/GL/LR/CCS), trazabilidad de materiales
embalaje & Envío
embalaje: Embalaje estándar de exportación – plates stacked with protective paper between sheets, wrapped in waterproof kraft paper and plastic film, paletas o cajas de madera, steel strapping, corner protection; protective film on request
Calificación: Aleación, temperamento, tamaño, número de calor, estándar, class approval stamp, logotipo del fabricante
Términos comerciales: ENGAÑAR, CIF, CFR, EXW, DDP
Pago: T/T (30% depósito, 70% antes del envío), L/C a la vista, Western Union, Paypal (pedidos de muestra)
Tiempo de entrega: Tamaños estándar en stock – 3-7 días; Tamaños personalizados – 15-30 días
Cantidad mínima de pedido: 1 ton for standard sizes; pedidos personalizados negociables
Puerto de carga: Qingdao, Llevar a la fuerza, Tianjín, Ningbó, o según lo solicitado
Por qué elegirnos
With over 15 years of experience in aluminum manufacturing and export, we are a trusted supplier of 5083 aluminum plates to shipyards, offshore engineering companies, and pressure vessel manufacturers in more than 50 países. Our factory is approved by major classification societies, ensuring compliance with international marine standards. We maintain large inventory of standard sizes and tempers for immediate delivery, and our experienced team can provide technical consultation, class documentation support, and customized solutions for your specific applications. Contáctenos hoy para una cotización competitiva!
