PROGRESO
Narrow cold-rolled 304 strip with bright 2B finish — the standard raw material for hose clamps, gaskets, shims, springs and decorative trim.
304 stainless steel strip is slit from cold-rolled 304 austenitic stainless coil into narrow widths with tight tolerance. The 2B mill finish is smooth, matte-silver and the most widely used surface for further processing.
Key Advantages
Composición química (AISI 304)
| Elemento | C | Y | Minnesota | PAG | S | cr | En |
|---|---|---|---|---|---|---|---|
| Contenido % | ≤ 0.08 | ≤ 1.00 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | 18.0 – 20.0 | 8.0 – 10.5 |
Propiedades mecánicas (recocido)
- Tensile strength (σb): ≥ 515 MPa
- Yield strength (σ0.2): ≥ 205 MPa
- Alargamiento (δ): ≥ 40 %
- Dureza: ≤ HRB 90
Standard Sizes
| Parameter | Range |
|---|---|
| Espesor | 0.05 – 3.0 milímetros |
| Slit width | 2 – 600 milímetros (custom) |
| ID / DE | 508 milímetros / 1000 – 1500 milímetros |
| Superficie | 2B / licenciado en Letras / No.4 / 8K mirror |
| Estándar | ASTM A666 / JIS SUS304 / EN 1.4301 |
Aplicaciones
304 strip is used for hose clamps, gaskets, shims, washers, springs, decorative trim, batería de cocina, transformer laminations and electronic components. For full coil see our 304/316L strip and coil range; for sheet plate see 304 hoja.
Processing & embalaje
Slitting, edge trimming, oiling, paper interleaving available. Coils are wrapped with waterproof film and strapped on wooden pallets.
Enviar espesor, slit width, surface finish and tonnage — we confirm price within 24 horas.
GET A QUOTE
