تقدم
304 مقابل 316L الفولاذ المقاوم للصدأ: Salt Spray and Corrosion Comparison
Stainless Steel Sheet Finishes: 2ب, بكالوريوس, No.4 and Mirror Explained
When you order stainless sheet, the finish code is not a cosmetic detail — it determines how the sheet forms, how it cleans, and how long it lasts. 2ب, بكالوريوس, No.4 brushed and mirror (رقم 8) look similar to the untrained eye but perform very differently. This guide explains each finish and when to specify it.
The Common Finishes
2B is the standard matte silver finish, produced by cold rolling and light skin pass. It is the default for most industrial applications, with a smooth but non-reflective surface that forms and welds well. بكالوريوس (صلب مشرق) is a brighter, near-mirror finish produced by annealing in a controlled atmosphere, used for appliances, food equipment and decorative trim. No.4 is a directional brushed finish with fine parallel lines, the classic “brushed stainless” look used in kitchens and elevators. No.8 is a true mirror polish, used for decorative panels, reflectors and architectural features. انظر لدينا 304 2ورقة ب.
| ينهي | مظهر | Reflectivity | الاستخدام النموذجي |
|---|---|---|---|
| 2ب | Matte silver | قليل | صناعي, اللحام, تشكيل |
| بكالوريوس | ساطع, near-mirror | Medium-high | Appliances, المعدات الغذائية |
| رقم 4 | نحى, directional | واسطة | Kitchens, مصاعد, تقليم |
| رقم 8 | Mirror polish | عالية جدا | ديكور, reflectors |
Why Finish Matters Beyond Looks
2B is the most formable and weldable finish — scratches from stamping disappear under further processing. No.4 brushed hides fingerprints and minor wear, making it the default for kitchen and public surfaces. Mirror finish looks premium but shows every scratch and fingerprint, so it is used only where it is not touched. For food processing, 2B or BA are preferred because they are easy to clean and the matte surface does not show water spots. For architectural facades, No.4 brushed or etched finishes hide weathering better than mirror.
Buying Advice
Always specify the finish in the purchase order, because “304 ملزمة” without a finish defaults to 2B, which may not be what you want for a decorative project. Brushed No.4 is directional — specify the grain direction (horizontal or vertical) for facade panels. Mirror finish is an extra processing step after the sheet, so it costs 2 – 3× more than 2B. For industrial fabrication, 2B is the right default; upgrade only when the visible surface needs it.
